WSS100 - WST100 Table of contents Instructions for use ......................2 Operator’s safety ..........................2 General information for using the vacuum cleaner ................2 Proper uses ............................. 2 General recommendations ......................2 Vacuum cleaner description...................3 Labels .............................. 3 Vacuuming of liquids ..........................3 Vacuuming of liquids and shavings (optional) ....................
WSS100 - WST100 Instructions for use Read the operating instructions and comply with the important safety recommendations identiÞ ed by the word WARNING! Operator’s safety General recommendations WARNING! WARNING! Before starting the vacuum cleaner, it is Risk of Þ re outbreaks and explosions.
WSS100 - WST100 Vacuum cleaner description Labels Optional kits Various optional kits are available for converting the vacuum Figure 1 cleaner: IdentiÞ cation plate: Code of the model, technical speciÞ cations, serial Shaving container kit number, CE marking, year of manufacture It keeps the shavings in the container.
WSS100 - WST100 Setting to work - connection to the power Extensions supply If an extension is used, make sure it is Þ t for the power draw and protection degree of the vacuum cleaner. WARNING! Minimum section of extension cables:...
WSS100 - WST100 Liquids vacuuming Technical specifi cations Parameter Units WSS 100 / WST 100 WARNING! Comply with the safety regulations governing the Voltage / frequency V/Hz 230/50 110/50-60 materials for which the vacuum cleaner is used. Power rating Noise level...
WSS100 - WST100 Controls, indicators and connections Emptying the containers Figure 4 Figure 7 ON/OFF switches of the vacuum units ON/OFF switches of the vacuum units Flow deviation valve control (WS...100DV models) Flow deviation valve control (WS...100DV models) Liquid exhaust valve...
WSS100 - WST100 Emptying the shaving container (optional) Maintenance, cleaning and decontamination Figure 8 Shaving container Container closing band WARNING! The precautions described below must be taken during WARNING! all the maintenance operations, including cleaning and replacing of the safety Þ lters.
WSS100 - WST100 Cleaning the containers Cleaning or replacement of the vapour fi lters WARNING! Figure 10 Before proceeding with these operations, turn off the Filters vacuum cleaner and remove the plug from the power Bafß e plate socket. Filter box...
WSS100 - WST100 Vacuum cleaner disposal Wiring diagrams Dispose of the vacuum cleaner in compliance with the laws in Wiring diagram list - fi g. 14 force. Reference Part Proper disposal (electric and electronic waste) number (applicable in the European Union and in countries...
WSS100 - WST100 Troubleshooting Problem Cause Remedy The vacuum cleaner suddenly stops. Activation of the level monitoring Emptying of the liquid container. system. Intervention of thermal protection Push the switches to stop the vacuum devices. cleaner, wait until the motors cool down, then start it again.
Need help?
Do you have a question about the WST100 and is the answer not in the manual?
Questions and answers