Technics SU-C700 Owner's Manual page 11

Connecting to analog audio output devices
You can input analog audio signals to this unit and play back music.
e.g.,
Record player*
1
*2
Audio cable
(not supplied)
*1 When connecting to a record player with a built-in PHONO equalizer, connect its cable to the analog audio input terminal [LINE IN].
*2 When connecting a record player with a ground wire, connect the ground wire to the PHONO EARTH terminal [PHONO EARTH] of this unit.
Connecting to digital audio output devices
You can input digital audio signals to this unit and play back music.
e.g.,
CD player, etc.
Optical digital audio cable
(not supplied)
≥ The digital audio input of this unit supports only the linear PCM (LPCM) signals listed below. For details, refer to the operating instructions of the
connected device.
Input terminal
Coaxial digital input
Optical digital input
This unit
(rear)
Audio cable
(not supplied)
This unit
(rear)
Coaxial digital cable
(not supplied)
Sampling frequency
32/44.1/48/88.2/96/176.4/192 kHz
32/44.1/48/88.2/96 kHz
Blu-ray Disc player, etc.
CD player, etc.
Number of quantization bits
16/24 bit
16/24 bit
11