Page 1
User’s Manual ZT303 Thank you for purchasing ZTC touch display GSM/ GPRS mobile phone. Please go through this manual carefully to make the best use of your phone.
CONTENT FOR YOUR SAFETY..........1 GETTING STARTED ..........5 ....5 AMES OF ARTS AND NTRODUCTION Technical Parameters .......5 2.1.1 Phone Layout..........6 2.1.2 Keypad Function........7 2.1.3 2.1.4 Side Key Function ........8 2.1.5 Icons............10 ............11 ATTERY Remove and Replace Battery ....11 2.2.1 Charge Battery.........13 2.2.2...
Page 3
............20 EATURES ........... 23 UNCTION ............. 25 AKE A Make a National Call.......25 3.3.1 Dial Extension of the Fixed Number..26 3.3.2 Make an International Call .....27 3.3.3 3.3.4 Dial Numbers in List........28 ..........28 MERGENCY ..........28 ECEIVE A ............
1 For Your Safety Read these simple guide lines. Not following them may be dangerous or illegal. SWITCH ON SAFETY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws.
Page 8
cause interference in aircraft. SWITCH OFF WHEN REFUELING Don't use the device at a refueling point. Don't use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Don't use the device where blasting is in progress. QUALIFIED SERVICE Only qualified personnel may install or repair this product.
Page 9
When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen.
Page 10
Network Services To use the device you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize them.
2 Getting Started 2.1 Names of Parts and Introduction Technical Parameters 2.1.1 Phone Item name ZT303 Demisnions About 47mm×97mm×13mm Weight About 80g Li-ion battery Item name ZT303 Standard voltage 3.7V Limited voltage 4.2V Nominal Capacity 650mAh Travel charger Item name...
Keypad Function 2.1.3 1. Left/ Right Key: Scroll the cursor left and right in editing mode; in standby, press Left Key to access messages Inbox, press Right Key to access Tone Setup; in the camera capturing mode, press Left/ Right Key to set EV data amog -4——+4;...
3. Left Selection Key: Carry out the operation at the down left of display. 4. Calling Key: Dial a phone number and answer a call; in standby, show all call lists. 5. Right Selection Key: carry out the function at the down right of display.
Page 15
1. Press Left Side Key to light the backlight when it is off. 2. During a call, press Left Side Key to modulate earpiece volume. 3. In standby, press Left Side Key to modulate key tone. 4. When alarm is alerting, press Up Left Side Key to “Stop”...
Left Side Key to modulate music volume while press and hold Left Side Key can shift songs. In Video Player, press Left Side Key can modulate movie volume. Icons 2.1.5 Icon Direction Show Position Strength of signal Icon area GPRS is connected Icon area Keypad is locked Icon area...
You have new WAP Icon area service messages. Alarm clock is active Icon area Divert All Voice Calls Icon area is active Battery indication Icon area You have missed call Icon area 2.2 Battery The handset is powered by a rechargeable battery. A new battery must be fully charged before the first time use.
Page 18
Warning: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Replace step: ① Insert the gold-colored contact end of the battery, into the battery slot. Push down on the other end of the battery to snap the battery into place.
Charge Battery 2.2.2 Insert charger plug into phone charger jack. Plug in charger. After a few seconds, in power on mode, the battery indicator in icon area starts to scroll from bottom to top; in power off mode, the battery indicator will also appear on display to show in...
Page 20
charging. In power on mode, when the battery indicator stops flash, the batter is completely charged. Ordinarily, the battery needs to charge 1-2.5 hours (12-14 hours in the first three times to reach its nominal capacity). Disconnect the charge after charging. Note: Always use the original batteried and the battery charger will maximize your battery’s performance.
charging times,this is normal.If you charge your battery regularly and notice a decrease in talk time or an increase in charging time, then it is the time to purchase a new battery. 2.3 Connect Network SIM Card 2.3.1 Before use your mobile you must insert valid SIM (subscriber identity module) card which is offered by network operator.
damaged. Remove it carefully before replacing. Switch off the phone; remove power supplier and battery. Insert SIM card into card slot. When you need remove the SIM card, please switch off the phone and remove power supplier firstly. Insert and Remove Memory Card 2.3.3 Power off the phone;...
Turn Your Device On / Off 2.3.4 Press and hold End Key to turn you device On/ Off. If you turn on the phone without inserting SIM card, the phone will indicate “Insert SIM Card”. After insert SIM card, the phone will check automatically whether the card can use or not.
Phone Lock 2.3.5 In order to protect your phone from illegal using, your phone can set Phone Lock. When the function is active, you must enter password to unlock phone. Subscriber can clear the lock, in that case, you can’t protect your phone.
After SIM is unlocked, the phone will search available network automatically. When connecting, name of network operator will appear on display. ZT303 supports GPRS (General Packet Radio Service), if your network operator open GPRS service for you and your phone locates in cover area of GPRS network, you can surf WAP by GPRS network.
3 Quick Start Guide 3.1 Features As a multimedia mobile phone, besides basic function, ZT303 supports rich, practical and convenient multimedia functions as follows: Phone Book: Can search phone number quickly; Every entry store corresponding numbers; the phone have a storage of 500 entries, and phone number storage of SIM card depends on card capacity;...
Page 27
Karaoke: The device can play the songs that edited by karaoke software synchronously with lyrics. eBook: The wireless device supports TXT format file. Memory Card: ZT303 supports mobile storage (this U disc). In Power Off mode, connecting mobile phone with PC, the device will Disc...
Page 28
“Storage Device”, the device will power off automatically and can be used as USB; selecting “Back”, the device will keep on power on and be charged. Camera: Your handset supports camera, you can customize the camera according to your needs, e.g., File Size Limit, EV, Effect Setting etc.;...
Scheduled Power On / Off, Speed Dial, Call Barring, Call Waiting etc. Network Service: Your device supports WAP service. Using WAP browser and roaming on wireless network to gain more information. Fun & Games: your wireless device provides interesting games; you can enjoy yourself in spare time.
Page 30
Book List Access Up Key Standby Mode Shortcuts Access Write Down Key Standby Mode Message Access Receive Left Key Standby Mode Message Access Tone Right Key Standby Mode Setup Show Call Logs Calling Key Standby Mode Volume Control Left Side Key Volume modulating mode...
3.3 Make a Call When the network operator’s name shows on the display, you can dial numbers. The signal on the up- left corner screen, it will show the strength of signal (when there are four bands, it shows the best signal). Barriers influence the talking quality.
You can press keys or click the touch screen to enter numbers for national calls according to the following order. District Number >> Phone Number >>Calling key ( ( ( ( ) ) ) ) Dial Extension of the Fixed Number 3.3.2 Some fixed numbers extension can not be connected directly, press “*”...
District Number >> Telephone Exchange>> “W” Extension >> “ Calling key” ( ) Make an International Call 3.3.3 To make an international call, press and hold * Key till the screen displays a international call prefix “+”, it will allow you to call from any countries when you don’t know the local international call prefix ( e.g.
3.3.4 Dial Numbers in List All dialed and received numbers are saved in the call history. Recent dialed call and received call are classified into the Missed calls, Dialed call, Received call menu respectively. When the Call Logs is full, the old numbers are deleted automatically.
earphone has been inserted, you can also press keys in earphone to answer a call. If you are not convenient to press key, you can set Automatic answer as “On” (the option only shows in the Headset mode), and confirm to insert headset well, the call will be connected after 5 seconds ringing or vibrating.
Page 36
Conference call functions etc. need network supporting, please contact the network operator. In the calling option, you can operate as follows: Hold Hold the current calling. Swap* Swap between the current calling and remained calling. H-Free Press Left Selection Key or click “On” to activate loud speaker, under the status of Handsfree activated, press Left Selection Key or click “Off”...
Page 37
telephone bank, automatic answer machine etc. ) Conference* Access Conference calling mode, you can receive the waiting call according to indication and invite caller to participate in conference calling; you can remain the conference call; you can talk with one of callers privately while keeping others;...
4 Menus Function 4.1 Using the Menu Shortcut Menus 4.1.1 In standby, click the icon on the display can access the relevant menus directly. Click access dialing numbers interface. Click to access camera capturing interface. Click to view the Phone Book List. Click to access Audio Player.
Page 39
Click “Phone Book” or press Right Selection Key to access Phone Book menu. The Phone Book function can store vcard information to phone, including name, number, home number, company name, email address, office number, fax numbe, birthday, associate picture/ video/ sound, and caller group. Note: The phone can store 500 pieces of entry, and the storage of SIM card depends on the card’s capacity.
Page 40
suitable size) as incoming call picture. Associate Video: Set customized video to current entry. You can select predefined vedio in the phone or suitable vedio from file. Associate Sound: Set customized ringtone to current entry. Pressing left/ right key can select inner ringtone as incoming call ringtone from phone system.
Page 41
Delete Selecting From SIM or From Phone can delete all entries from SIM or from phone respectively; you can also select One By One to delete entry by entry. Note: Deleting all numbers From SIM or From Phone need to enter password, default as 0000. Please use the delete function cautiously to avoide loss of important information.
Page 42
SOS Number: Can set 5 entries at most. Settings Can select the following option: Memory Status Can check the phone book memory capacity of phone and SIM card and how much memory has been taken up. Preferred Storage defaulted saving location of phone book, subscriber can also select the location while store the number.
Page 43
music sent to User Profiles as caller ring tone. Caller Video Can select video from file manager as caller video. In standby, you can click to check Phone Book List, press Left Side Key or Up/ down Key to scroll and select an entry. Pressing Left Selection Key, you can operate current number entry as follows: Dial Dial the number.
Page 44
Note: when the selecting entry is in SIM card, you can only see the information about name, number and caller groups. Edit Edit the information of selecting entry. Delete Delete the entry. Copy Copy current entry to the other carrier. Move Move current entry to the other carrier.
Scroll, Search, and Select Funtion 4.1.2 In standby, press Left Selection Key or click “Menu” to access main menu interface; during a call, press Left Selection Key or click “Option” to access Call Menu, press Up/ dowen Key or Left Side Key to scroll to the menu you want, and press Left Selection Key or click “OK”...
Exit from Menus 4.1.4 In menu function, generally, you can press Right Selection Key to exit from a menu, or press End Key or click to back to standby. Note: The following menus function mainly introduce keypad operation, the operation about touch display can see the guide words on display.
Page 47
1-4-1 Receive Mode 1-4-2 Read Message 1-4-3 Languages 1-4-4 Channel Setting Phone Book 2-1 Search Entry 2-2 Add New Entry 2-2-1 To SIM 2-2-2 To Phone 2-3 Copy All 2-3-1 From SIM 2-3-2 From Phone 2-4 Delete 2-4-1 From SIM 2-4-2 From Phone 2-4-3 One By One 2-5 Caller Group...
Page 48
2-8 Caller Picture 2-9 Caller Ring Tone 2-10 Caller Video 3 Call History 3-1 Missed Calls Dialed Calls Received Calls Delete Call Log 3-5 Call Time 3-5-1 Last Call Time 3-5-2 Total Sent 3-5-3 Total Received 3-5-4 Reset All Time 3-6 Call Cost 3-6-1 Last Call Cost 3-6-2 Total Cost...
Page 49
4-3 eBook 4-4 Photo Artist 4-5 Video Recorder 4-6 Video Player 4-7 Audio Player 4-8 Sound Recorder 4-9 Melody Compose 4-10 File Manager Settings 5-1 Pen Calibration 5-2 Phone Setup 5-2-1 Time and Date 5-2-2 Schedule Power On/ Off 5-2-3 Language 5-2-4 Preperred Input Method 5-2-5 Greeting Text 5-2-6 Speed Dial...
Page 50
5-3-9 Show Operator Name 5-4 Call Setup 5-4-1 Call Waiting 5-4-2 Call Divert 5-4-3 Call Barring 5-4-4 Call Time Reminder 5-4-5 Call Time Display 5-4-6 Auto Redial 5-4-7 IP Number 5-5 Network Setup 5-5-1 Network Selection 5-5-2 Preferred Networks 5-5-3 GPRS Connection 5-6 Security Setup 5-6-1 SIM Lock 5-6-2 Phone Lock...
Page 51
6-2-2 nWay Stopwatch 6-3 Game Setting 6-4 Karaoke 6-5 Mobile QQ 7 User Profiles 7-1 General 7-2 Meeting 7-3 Outdoor 7-4 Indoor 7-5 Headset Services 8-1 STK* 8-2 WAP Browser 8-3 Data Account 9 Extra 9-1 Calendar 9-2 To Do List 9-3 Alarm 9-4 World Clock 9-5 Calculator...
Page 52
select “Messages” which includes the following options: SMS, MMS, Voice Mail Server and Broadcast Message. 4.3.1 You can send and receive Chinese and English short message by SMS center. The phone supports Enhanced Message Service (EMS), you can insert picture, animation, melody and sound into message, you can also use format to create message.
Page 53
and the receiving date will also been seen in floating bar. In Inbox list, you can press Left Side Key or Up/ Down Key to scroll through messages, and press Left Selection Key or click OK to read Message Body which includes receiving date and time, number or name (if phonebook has stored the number) of sender.
Page 54
option. Move to Phone If the message is stored in SIM card, this option can move message phone, otherwise there will be no such option. After move, message will no longer store in SIM card. Copy All Select From SIM or From Phone to copy all messages to other carrier.
Page 55
serval objects, you can scroll Up/ Down Key to select one to save. The picture, animation and ring can save to My Picture, My Animation and My Melody. 4.3.1.2 Outbox Access Outbox to view the messages you save in the phone (including SIM and phone). In Outbox list, you can press Up/ Down Key to scroll through messages, press OK to read message detail, and then press Option to access...
Page 56
SIM card, this option can move message phone, otherwise there will be no such option. After move, message will no longer store in SIM card. Copy All Select From SIM or From Phone to copy all messages to other carrier. Move all Select From SIM or From Phone to move all messages to...
Page 57
Accessing Write Message, you can edit short message. Press Left Selection Key to access Option. Done After edit, select the function, you can make following operations: Send Only, Save and Send, Save, Send To Many, and Send By Group. Use Template You can insert predefined message that use commonly at the cursor.
Page 58
music from phone at cursor. My Melody: The catalog saves the imy format music you pick up from received EMS. Predefined Sound: Insert polyphonic music that predefined in system at cursor. Format Text By the function, you can set format for words in messge. Text Size: You can set the text size as Small, Medium, Large;...
Page 59
After edition is “Done”, you can select Send Only and then enter number, or press Left Selection Key “Search” to select the receiver’s number; selecting Save and Send, the message will be saved into outbox after it is sent; selecting Send to Many will access Edit List of receiver and can send to many people;...
Page 60
4.3.1.6 Message Settings Before using SMS function, you must make revelant setting. Accessing Message Settings, you can select following functions: Profile Setting: Please contact with network operator to get SMS center address. Access the submenu, will show Profile Setting list, the entry of list will change for different network operator and SIM.
Page 61
Note: Valid Period of message and realization of Fax, Page, E-mail need the support of network operator. Common Setting Set Delivery Report. Press Left Selection Key to On/ Off the function. If On the setting, the SMS center will send delivery report to tell your message has been sent or not been sent by some reasons.
Page 62
message deliver bearer. 4.3.2 Basic Knowledge MMS, Multimedia Message Sevice, its main feature is supporting multimedia that can deliver word, picture, sound etc., various multimedia format message. MMS need the support of network operator, please check if your SIM card supports the service or consult with network operator before using.
Page 63
Note: When there is only one receiver, will show number or name from phone book; if there are more than two receivers (including two), will show “? Receivers”, for example: two receivers will show “2 Receivers”. Send If To, CC and BCC are all empty, the option cannot be used;...
Page 64
number. Add Email Continue to add receiver Email address. Edit Edit the number of receiver. Delete Delete current number receiver list. Note: MMS Subject can be empty, and then the default subject is “No Subject”, but MMS content cannot be empty. In editing MMS content mode, press Left Selection Key “Option”...
Page 65
preview, select Option to edit the silde. Next Slide Access next slide preview, select Option to edit the silde. Preview Preview current slide. Slide Time Set show time of current slide (second). Show time must between 1-60 seconds; whenever exceed the extent, the phone will give a note and reture to edit interface.
Page 66
the top of display as: current slide/ total slide and the size of MMS. 4.3.2.2 Inbox Inbox save all received MMS. When receiving a new MMS, the phone will ring (if Message Tone is on) and the display will show message icon.
Page 67
to save to SIM or phone, or dial the number directly. MMS Reply Edit MMS to reply to Sender or All. The subject will change as “RE:” original Subject. Pressing Left Selection Key or click “+” can open or fold “MMS Reply”.
Page 68
4.3.2.3 Outbox Outbox saves MMS that fail to send. Press OK to access Outbox submenu and the phone will show MMS list in Outbox. Scroll Up/ Down to view MMS and press Left Selection Key “Option” to make following operation: View View current MMS content, press Right Selection Key to stop...
Page 69
4.3.2.4 Drafts Drafts saves unfinished MMS which can be revised and sent. Press OK to access Drafts submenu and the phone will show MMS list in Drafts. Scroll Up/ Down to view MMS and press Left Selection Key “Option” to make following operation: View View current MMS content, press...
Page 70
following operation: View View current MMS content, press Right Selection Key to stop MMS playing. Detail The detail includes sender, CC, subject, date, time and size, etc. Forward Edit phone number and other detail of receiver to forward current MMS, meanwhile the subject changes as “FW:”...
Page 71
Receive method, Advertisement, Delivery Report, Read Report, and Max Size (any number betweet 0-300K) Filter Setting Can set 20 entries of filter content which can be phone number and Email. Network Setting Includes the setting of MMSC (can’t empty), Gateway, Port, Data Acount.
3. If you receive a MMS that larger than received space in current setting, PUSH message will indicate that. You can read the MMS content by Pushbox. Voice Mail Server 4.3.3 If you can’t answer a call, it will automatically be diverted to voice mail server, and the caller can leave voice message for you.
Access Broadcast Message submenu, you can see four options: Receive Mode, Read Message, Languages and Channel Setting. Access Channel Setting, you can Select the channel and filtrate the broadcast you don’t need; you can Add new channel and set name and number of new channel;...
example, in China mainland, for the China Mobile M-zone subscriber the menu will show M-zone; and for China Union SIM card subscriber, the menu can’t be used. WAP Browser 4.4.2 Your phone support WAP service. You can visit various WAP services, such as news, weather report and airline, etc.
Page 75
View Connect with the bookmark website. Edit and add Name and URL to new bookmark. Edit Edit Name and URL of current bookmark. Set to homepage Set the bookmark URL as login on homepage URL. Delete Delete the bookmark. Delete All Delete all bookmark information.
Page 76
4.4.2.4 Files In the submenu, you can save 20 websites as local file. Access “File” menu, press Left Selection Key “Option” to make following operation. View Connect with certain address of the website. Delete Delete the website. Delete All Delete all website in file. 4.4.2.5 History In the submenu, it will list the website that you visit recently.
Page 77
Network Setting Includes the setting of Homepage, Gateway, Port and Account. Color Setting Includes the color setting of Normal Text, Link Text, Link Background, Active Text and Activation Background. Advaced Setting Includes Cache Setting, Cookie Setting and Display Setting. Cache Setting includes the setting of whether Using Cache and Cache size.
Page 78
sent with a HTML website to your browser when you visit a website. Pushbox Setting of Whether allow Pushbox receive PUSH message. In addition, the operation of browsing WAP, we offer you following instruction: 4.4.2.7 WAP Online Direction Online Function When browse WAP serive, press Left Selection Key “Option”to make following operation.
Page 79
Homepage Setting Set the current website as homepage. Save websit Save current website to File menu. Save Picture Save pictures of current website to File Manager. History Access history list. File Access file list. Setting Access browser setting interface. Pushbox Access Pushbox list.
4.4.2.8 Pushbox Pushbox can read service message. Your phone can receive service message (push message) from network operator. For example, servie message can be a notice of brief news which may contain a text and WAP service adderess. There are three way to deal with the messae: Read, Delete and Delete All.
Speed The speed of connecting WAP, press Left/ Right Key to set as 4.8Kbps, 9.6Kbps or 14.4Kbps. DNS server address of WAP. 4.4.3.2 GPRS In the submenu, will show GPRS data account; selecting one, you can make following Edit: Account Name Can edit account name. Input APN, default as cmwap.
calls list. Select one of the list and press Left Selection Key “OK” to view call information which includes date, time and name (if the number has been saved in phone book), number and frequency. Click icon or press “Calling Key” to call the number directly.
book), number and frequency. Click icon or press “Calling Key” to call the number directly. When viewing Dialed Calls detail, Left Key “Option” function is just like Missed Call. Received Calls 4.5.3 Access Received Calls menu, will show received calls list. Select one of the list and press Left Selection Key “OK”...
Call Time 4.5.5 Pressing Left Selection Key “Option” to access Call Time submenu, you can view call time log of phone up to now. Last Call Time Show last call time Total Sent Show total call time of dialed numbers. Total Received Show total call time of received numbers.
Price Per Unit Press Left Selection Key “Setting” to set price per unit. Note: Call Cost function needs the support of network operator. The setting of Reset Cost, Max Cost and Price Per Unit need input PIN2, you can contact network operator to get the password. SMS Counter 4.5.7 In the menu, you can see the message amount of...
Camera 4.6.1 The phone has internal high definition camera, you can take photo at your pleasure. Note: In standby, click icon to access camera view capturing mode directly and press Calling Key or click to shoot. 4.6.1.1 Camera Setting In camera view capturing, you can press Left/ Right Key to adjust EV data, press Up/ Down Key to adjust focus, press Number Key 1 to adjust Effect Setting, press Number 2 to adjust White Balance,...
Page 87
All the settings can be adjusted by Left/ Right Key, and actived by pressing Left Selection Key “OK”. Image Setting Includes setting Image Size and Image Quality. Image Size 、 adjusted 176×220 160×120、320×240、640×480、 1280×960; Image Quality can be Low, Normal, High and Fine.
Memory Card. Restore Default Press Left Selection Key “OK” to restore default. 4.6.1.2 Shooting After find a view, press Calling Key or click to shoot. After shooting, press Left Selection Key or click “Save” to save the image and back to capturing; press Right Selection Key to clear the image and back to capturing.
Browse Style, Forward, Rename, Delete, Delete All or Sort. When viewing photo, you can press Left Side Key or Up/ Down Key to view one by one. Browse Style can be Lsit Style or Matrix Style. Forward can send the photo To Wallpaper, To Screen Saver, To Power On Display, To Power Off Display, To PhoneBook, To MMS, and To EMS, but whether it is successful to operate is related with the the MMS...
Storage Select the storage position of file: Mobile or Card. Note: The function only supports TXT text and the text must store in eBook. Photo Artist 4.6.4 Press Left Selection Key “OK” to access File Manager, select the picture you want to modify and operate by pressing Left Selection Key “OK”.
Page 91
Add Frame Add frames to the picture. A picture can repeatly add frame. Add Icon Add Icons to picture. Scroll Navigation Key and press “OK” or click icon directly to select the icon. A picture can repeatly add icons by pressing Navigation Key, or using pen to move to the position and then clicking to copy the icon.
down; press Left/ Right Key or click icon to flip the picture left and right. Expand Canvas If the picture size is a full display size (that is 176×220), you can adjust the canvas size by the function. Help Instruction of adding effect, adding frame and adding text.
Page 93
follows: To Player To “Video Player” List, show the current movies in the List. Camcorder Setting You can operate “White Balance, EV, Night Mode, Banding”, “Left/Right Key” to adjust the above operation. After finishing it, press “Left Selection Key” to active the setting. Video Setting Including modulating...
Page 94
Effect Setting Setting video recorder’s effect. Storage Set video recorder’s Storage: Phone or Multi- Media Card. Restore Default Press” Left Selection Key” >> “Option” >>”Ok”, then it will restore default. 4.6.5.2 Video Recorder In the status of Camcorder, modulating the camera lens, the selected pictures are displayed in the selected scenery rim.
Letters, letters can change from A to Z. Movies are saved in the Player; you can search them from the menu of “Video Player” or “File Manager”\ Multi-Media Card. Video Player 4.6.6 Select “Video Player”, it is convenient for you to search the saved movies in the Player List.
Audio Player 4.6.7 Under the menu of Audio Player, “Up/Down Key” can control the progress of playing and pausing. “Left/ Right Key” can change the forward or back playing piece and through “Left Side Key” to modulate volume. Press Left Selection Key >>Enter “List” >>play any piece of melody from playing list in “Option”, see the detailed information\ add ring storage (set the tones as ready ring tones, update the List and make detailed...
Page 97
“Ok”, you can Add New Entry in “Option”(add music file to play list of File, select “Remove” to move a single audio file from the List, Select “Remove All”, it will move all the audio files. Repeat it can set the audio playing repeatedly.
Spectrum Display Style when playing audio; if you select “Off” , Spectrum display will not show while playing music. Note: In Audio Player interface, Click “ ” to access Setting Option and can set the content. Recorder 4.6.8 The submenu will list the recorder files with suffix of AMR and WAV in your mobile phone.
Page 99
presses End Key to return to Standby Mode, and the system will save the file automatically. Note: In the recorder files editing mode, you can clear file name, then press Right Selection Key “Back” to quit current recorder file. Play Play the selected recorder files.
to “user profiles” as ready tones, or forward records through SMS and MMS after editing (Only limit EMS). Whether the operation is successful or not, it depends on the space capability of MMS and the size of files. Melody Compose 4.6.9 In this function, you can use MIDI editing function in your phone to edit your own melody;...
Page 101
About the detailed editing method, please refer to the detailed introduction in the last part of this point. Add New Entry Add new audio files. Rename Edit and rename files Delete Delete the selected files. Delete All Delete all files. Forward Send the edited melody to User Profiles as incoming call ring...
Page 102
Digital Key“8”: Insert a vibrating note Digital Key “9”: Insert a backlight/led note。 # Key: If there is a current note, convert among rising semitone, normal, down halftone by pressing # Key. *Key: If there is a note or a pause currently, change the time length of current note by pressing *Key;...
Page 103
decrease the current note by a “tong group”, say “low eight rhythm”. If the current note is a vibrating one, backlight or led symbol, then deactivate vibrator / backlight / LED. Left Key: Move forward one note. Right Key: Move Back one note. NOTE: Click the interface to edit melody,...
can enter “Option”>> Ring, the following option can be operated. Play Play the editing rings. Play Speed Modulate the audio speed of edited rings: “Fast, Normal, Slow” Select Instrument There instruments select: Piano, Guitar, Violin, Saxophone, Steel Drums, Flute, Harmonica, Trumpet, Music Box,...
Page 105
data folder and edit the name. Format To format the Flash Memory, the operation will delete all data in current flash memory. Move Select the option, the Disc of Memory Card will not be shown, but restart the mobile, it will show again.
Page 106
Mobile phone). If select one certain file, press Left Selection Key “Option” to show the following option: Read Read TXT files that saved in the device. View If the files are supported by mobile picture file, then you can view the pictures, if the devide can’t support the file, you will be reminded that the format is wrong.
Page 107
to “Wallpaper, Screen Saver, Power on Flash Display, Power off Display, Phone Book” by MMS and SMS. But for video files, you can forward them to Phone Book, Screen Save, Power on Flash Display, Power Display. Under different situations, you can operate it according to screen reminder.
Page 108
target folder, “Open” , Enter the following data folders , then decided whether copy it or not. Create New Folder, create new and copy the selected files to new folder. Move The same operation as “Copy Files”, the difference is that files will not remain the original place after being moved.
4.7 User Profiles Your phone has various user profiles for which you can customize the phone tones for different events and environments. The following profiles are available: normal, meeting, and outdoor, indoor, handset. Please select different profile according to the current situation, and then activate your customized profile.
Page 110
volume) And then activate the selected profile. Mute In standby mode, press and hold # key to access into mute mode and open vibrator. It will show ] standby mode. It will exit to the former mode when make same operation. Note: Except Mute mode, other five profiles have been set by the factury, and defaulted to active Normal mode.
Page 111
rings are for your option. However, concerning the ring type “Power On/Off, Message Tone, Keypad Tone”, still provides predefined tones for your option or turn off relevant volumes Silent; Keypad Tone can be set as “Silent, Click, Tone”. Volume Control the volume of Ring Tone and Key Tone.
tones of Warning, Error, Camp on and Connect, in the relevant situations, it is reminded by tones. Answer Mode Can Option/ Cancel Auto Answer mode (headset mode only) or Any Key answer mode (except End Key and Right Soft Key) and save the setting.
Page 113
settings could be done: 4.8.2.1 Time and Date Under this menu, you can set time and date in your phone. It includes three submenus. 59 international cities in total, Cities select different cities, your can change time zones of your mobile phone.
Page 114
as it has been set. Note: if same time is set, it will not be activated. 4.8.2.3 Language Setting up the current language as “Simple Chinese” or “English”, both menu and display will show the selected language. 4.8.2.4 Input Method Select one input mode among six ones as a words editing mode.
Page 115
Select Assign, or if a number has already been assigned to the key, select Options> Change. Select Search, the name, then the number you want to assign. If the Speed dialing function is off, the phone asks whether you want to activate it. 4.8.2.7 Shortcuts In the submenu, press Left Soft Key “Option”...
Flight Mode and Query When Power On. If “Flight Mode” is selected, all functions in SIM Card will be hided. 4.8.2.10 Handwriting It includes “Pen Speed” and “Pen Color”. Pen Speed can be divided into three grades: Fast, Medium, and Slow. Eight colors of Pen Color are for your option. 4.8.2.11 Other Setting Setting “LCD Backlight”...
Page 117
File Manager. When viewing pictures in system, you can press Left / Right Key to scroll through pictures. Screen saver Selecting Setting in Screen Saver submenu, you set on/ off Status and Waiting time (5 Sec/ 15 Sec/ 30 Sec/ 1 Minute). Selecting Select in Screen Saver submenu, you can set screen saver by selecting the wallpaper...
bmp、 、 、 、 mp4” formats. Power off Display Same operation as Power on Display Show Date and Time Show Date and Time when “ON/OFF” Setting. Show Owner Number If you set “on”, it will show the using number of Lines of Communication.
Page 119
will notice you if any new incoming calls when dialing. Activate Activate the mode Deactivate Deactivate the mode Query Query Status of this function 4.8.4.2 Call Divert “Call Divert” network service allows the business incoming call to be diverted to your named telephone number based on some preplanning.
Page 120
Some network operators can’t provide such service, for detailed information, please contact with local network operator. Network operators provide “Barring Code” with four numbers so that you can activate “Barring Code”. In this menu, you can restrict the following callings respectively. Outgoing Calls It may Activate, Deactivate, or Query three operations for barring calls such as “All Calls,...
Page 121
barring password and set up new barring code. 4.8.4.4 Call Time Reminder In the menu, you can choose the following modes to keep talking for a period of time according to the reminding of menu function. Deactivate the function Single Input any number from one to three thousand.
traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your device redials the number (number of times is specified by the network), and notifies you once the network is available. In the standby mode, select Menu > Settings > Call settings >...
Page 123
SIM information. Manual Select network service manually. The mobile phone will search the current list of service operators for users according to the SIM Styles. 4.8.5.2 Preferred Networks Preferred Networks Prefer to select network operator. Access the menu, it will list the customized preferred network operators, press Left Soft Key “Option”...
grades network operators. Delete Delete the current selected network operators. Note: when the preferred network operators are over ten, “Add From List, ADD New Entry” will not be shown. Only deleted the List to less than ten operators, this two options will be displayed again (Option Service is related with SIM service.) 4.8.5.3 GPRS Connection...
Page 125
(4 to 8 digits) help to protect your SIM card against unauthorized use. If your SIM is locked, select “Activate”, Enter PIN code then activate SIM Lock. You should enter the correct PIN code to access if Power On next time.
Page 126
4.8.6.2 Phone Lock Phone lock can be protected your mobile phone to be used by others. Access the submenu” Phone Lock”, you can make setup as follows: Select “Turn on” >> Enter the correct phone lock password, you can input the right code next time, then activate your mobile phone.
Page 127
the fixed numbers or several numbers as starting. Access “Fixed Dial”, you can set it as follows: Mode Through inputting PIN2 code to finish the “ON/OFF’ setting of “Fixed Dial” Fixed Dial List Press ”Ok” to show the fixed dial list,>>...
Page 128
numbers. Note: “ON/OFF” the barred dialed numbers function, you need to enter PIN2 code, please contact the network operators in order to gain the PIN2 code. If you enter three wrong PIN2 code, the fixed dialed function will not available. At this time, it need PUK to unlock it .
Restore factory settings 4.8.7 To reset some of the menu settings to their original values, select Menu > Settings > Restore factory setting. Enter the security code. The data you have entered or downloaded are not deleted, for example, the names and phone numbers saved in Phone Book. Sound Effect 4.8.8 Set the equalizer’s content of Music Player, you...
Page 130
finger to move bricks (or use key 2,4,6,8 to move bricks). Games have four levels. From the first level to 4th level, the bricks in games will increase from three pieces to six gradually, and then it becomes more and more difficult.
Page 131
Easy, Normal, Hard. The scale of small pictures enlarges more and more, it become much more difficult. Press key introduction After entering into “Puzzle”, you can set up the game Mode beforehand, if not set, when selecting the Left Selection Key to entry into New game, it default to entry “Simple”...
Easy, Normal, and Hard. It increases difficulties with the speed of stairs going-up. Access the Game; you can redefine the Game Mode. If you don’t redefined, when Left Selection Key is to select New Game, it will Default the “Simple Mode”, at up-right of the screen, it will show energy grades and scores.
“LEFT/RIGHT KEY’. Stopwatch 4.9.3 Typical Stopwatch It classified into “Split Timing and Lap Timing”, select “View Record” and view the timing record. nWay Stopwatch Press Left Selection Key “on”, then press the Navigation Key record the four time from “Up /Down /Left / Right”.
broadcasting list, use the Left Selection Key to control the volume. In the broadcasting mode, Press the Left Selection Key to show the list of the broadcasting, Press the Right Selection Key to quit from the broadcasting mode. You can choose any songs in the broadcasting list, check the detail information of the music file, add your favorite ringer tone (you can choose the playing music as the optional ringer tone), refresh the broadcasting list and...
Note: The functions will be charged if you login on your 4.10 Extra In the main menu, Press the Navigation Key >> scroll to “Extra”, you can use many practical functions of the device. 4.10.1 Calendar The calendar keeps track of reminders, calls you need to make, meetings, and birthdays.
Page 136
Task List. In power on mode, when the event you prearranged gets the time, the device will riing to alert you to finish the event. When the schedule is empty, you can add new schedule; when there is schedule, press Left Soft Key “Option” to make following operation: Browse View the selected scheduling content.
Page 137
Customize”. (default alarming between Monday and Friday). Users can define alarming in some days Note: the device provides certain storage for schedule calendar, if you can’t entry new copy, you must delete some less important records in order to create new. Only “ON” the alarm, this mode can be effective.
4.10.2 To do List Use the to-do list feature to keep track of your tasks. You can save a note for a task, select a priority level for the note and mark it as done when you have completed it. You can sort the notes by priority or by date. In the menu of “Option”, you can “Browse, Add New, Edit, Delete Record, Delete All,, Transmit Working Schedule.”...
To set a snooze time-out, select Snooze time-out. Stop the alarm The phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone was switched off. To stop the alarm, select Stop or open the phone.
4.10.5 Calculator The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root and converts currency values. Note: This calculator has limited accuracy and is designed for simple calculations. Select Menu > Extra> Calculator. When 0 is displayed on the screen, enter the first number in the calculation.
Weight Select to the relevant function menu by Up/Down Key, press “Left/Wright Key” to Convert “Kilogram <-> Ounce” and “Kilogram<-> Pound”. Choose the Converter unit, enter numbers in any unit column, then “Option”, it will show the result in another one. Length Select to the relevant function menu by Up/Down Key, press “Left/ Rright Key”...
options. Enter the exchange rate, press the # key for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign.
4.10.10 Shortcuts Under this menu, you could choose a certain function to operate the selected menu. 5 Input Setting 5.1 Brief Chinese and English input is supported, including Chinese Pinyin, Chinese stroke, English ABC input, English abc input, number 123 input, common symbol...
input. Chinese input fuction as the followings: Input,edit SMS or MMS Edit the phone book Search phone number and name Self-setting greetings, master name …… 5.2 Keypad Usual keypad functions (special keypad functions refer to Paragraph 5.3, the introduction of input): Left Selection Key: usually confirm.
* Key: In input modes, you can press * Key to show symbol input table. 5.3 Input Mode The phone offers Pinyin, English, Number, Symbol and Handwriting Input mode. When inputing, you can shift through input modes. Note: Intelligent Pinyin input and Stroke input mode can’t support handwriting input function.
Page 146
through words, and select the word in column by clicking it. Click display to move cursor. Click to show symbol input interface. Click to input blank. Click to delete letter or character. Click to hide Pinyin letter and click show Pinyin letter. The definition of keypad under Chinese Pinyin Input:...
Page 147
Left / Scroll to left Right key Scroll to right Left Selection Choose Right Delete or exit Selection Key End key Return to standby display General inputting order of Chinese Pinyin Input: Input Pinyin character:number key 2 – 9 input Pinyin;...
Selection Key deletes the Chinese character. Input shifting: pressing # key rotatively shifts input, the display has relevant icon indicator。 Intelligent Pinyin Input 5.3.2 The definition of keypad under Intelligent Pinyin Input: Key name Character or Function Direction Number 2 key Number 3 key Number 4 key Number 5 key...
Page 149
Right key Shift right Left Selection Choose Right Selection Delete or exit End key Return standby display General inputting order of Intelligent Pinyin Input: Input Pinyin letter: Press Number Key 2-9 to input Pinyin, the phone will show all the possible Pinyin combination, eg.
Key to turn over display, press Left/ Right Key to search associated word presss Left Selection Key to select. Edit inputed word: Press Left/ Right Key to move cursor left/ right, Up/ Down Key to move cursor up/ down, and Right Selection Key “Delete” Chinese character.
Page 151
Number 5 Shun zhe Refer diagram Number 6 Fuzhe Refer diagram Number 7 Lizhe Refer diagram Number 8 Henshuzhe Refer diagram * key press* key to display the Chinese input interface # key Shift the input Page up navigatio n key Down Page down navigatio...
Page 152
Left Choose Selection Right Delete or exit Selection Hand-up Return to the standby interface Function Input the confirmed Chinese character Diagram:the corresponding chart of stroke and the character The general input order of the stroke segment input: Press the related number key as per the Chinese character segment order to input segment,the related Chinese character will...
Page 153
display for choosing ; Chinese character segment can be inputed as the segment input;press Left Selection Key or function key to confirm the segment; press Right Selection Key to delete the last segment。 Choose and confirm the Chinese character: up&down navigation key pages up or down,,left or right navigation key turns over left or right to seach for the needed Chinese character,Left Selection Key to input the...
right,up&down navigation key pages the cursor up or down,press Right Selection Key to delete the Chinese character. Input shift:press#key to rotatively shift the input, there have icon director in the display icon module。 English Input 5.3.4 The keypad definition of English input (includes capital letter input and small letter, and click shift between two input mode)...
Page 155
Number 7 PQRSpqrs Number 8 TUVtuv Number 9 WXYZwxyz Number 0 Space * key Press *key to display special character input interface #key Shift the input Page up the cursor navigation Down Page up the cursor navigation Left Turn over the cusrsor navigation left Right...
Page 156
Right Delete or exit Selection Hand-up Return to the standby interface The general input directions of English input: Each key can input several characters. Press repeatedly and quickly a key to display the character you need. Press number key 1 repeatedly to input the interpunction you need under the English input (including the AB and ab input) Press *key to display the special character...
Number Input 5.3.5 Click number on display to input the number. Click display to move cursor. Click to input blank. Click to delete letter or character. Click to hide number and symbol, and click to show number and symbol. The definition of number input: Key name Character function...
Page 158
Number key 5 Number key 6 Number key 7 Number key 8 Number key 9 Number key 0 * key press*key to display special character interface #key Shift the input Up key Page up the cursor Down key Page down cursor Left key Turn over the cursor...
Press the number key 0-9 to input the corresponding number. Press *key to display the special character interserface and press navigation key to choose the special character and press Left Selection Key to input it under the number input method Press Right Selection Key to clear up a wrong input,press and hold Right Selection Key to clear up a line character.
select the letter you want, or use touch pen to write the letter. After writing, display will show the distinguishing character automatically and show alternative characters in column. Note: (1) In input mode, the phone can only distinguish relevant character, eg: in Capital input mode, the phone can only distinguish Capital letter and can’t distinguish others.
Page 161
Have no mobile Avoid signal mobile in a remote dialing jam time place e.g.when duty on or duty off Too far from the Ask the network frequency operator transmiting announce tower network overlay Echo regional Hand cacophony problem redial, maybe can caused by a change network...
Page 162
Searching Move a place with network strong signal or transmitting power tower will use up phone. a large of power and shorten the standby time Fail to turn on power Check the battery the mobile battery is used power capacity or recharge it SIM card error card...
Page 163
Weak signal Move to a place of strong signal and try again Fail to call Have set call bar Disactive call bar function function Have set a fixed Disactive dial function PIN wrong input wrong PIN Contact with your code network operator continuously for three times...
some function operator have no network operator the service or you didn’t reply for the service 7 Appendix MP4 and 3GP file format are defined by ISO/IEC 14496-12, ISO/IEC 14496-14, 3GPP TS 26.244 etc. standard file. For example, the same as AVI, MP4 and 3GP file can also include various audio and video streams.
Page 165
Audio: AAC Video: ISO/IEC 4496-2 simple profile @ level 0/1/2/3、ITU-T H.263 profile 0 @ level 10, support utmost QCIF(176x144). Subscriber can use following sofeware to convert AVI, MPG, WMV etc. file into phote supporting format. a. Xilisoft 3GP Video Converter file can refer to: http://www.xilisoft.com/ b....
8 Appendix Simply, webcam is to realize video chat by connecting phone camera and Internet network of PC. PC station demand to realize webcam: 1. Operating system of PC must be windows XP or above. 2. Need to install MSN, QQ etc. chating tools that support video chat.
Page 167
Feactures of webcam: 1. Supporting plug and play. 2. VGA: 640×480 pixels. 3. Frame: 30 fps(CIF) ;15 fps(VGA) 。 4. Automatic exposure 5. Automatic plus control 6. Can improve video effect by adjust webcam setting in PC: brightness, contrast, color, saturation, definition, balance and backlighting etc.
Need help?
Do you have a question about the ZT303 and is the answer not in the manual?
Questions and answers