How To Start A Wps Session Via The Admin Tool - Technicolor TC8717C Setup And User Manual

4.2 How to start a WPS session via the Admin Tool

Adding a wireless client using WPS PBC
1 Make sure that the WPS button of your wireless client is accessible. This button can be a hardware button or a software
button.
2 Browse to the Admin Tool (http://10.0.0.1), using a computer or device that is currently connected to you Gateway
(either wired or wirelessly).
For more information, see
3 On the Gateway menu, click Connection and then click WiFi.
4 The WiFi page appears, click ADD WIFI PROTECTED SETUP (WPS) CLIENT.
5 The Add WiFi Client page appears.
6 Click PAIR.
7 Within two minutes, press the PAIR button of your wireless client.
Adding a wireless client using WPS PIN entry on the wireless client
1 Browse to the Admin Tool (http://10.0.0.1), using a computer or device that is currently connected to you Gateway
(either wired or wirelessly).
For more information, see
2 On the Gateway menu, click Connection and then click WiFi.
3 The WiFi page appears, click ADD WIFI PROTECTED SETUP (WPS) CLIENT.
4 The Add WiFi Client page appears.
5 Write down the number displayed in AP PIN.
6 In the WPS Pin Method list, click Enabled.
7 Open the WPS PIN page of your wireless client and enter the PIN that you wrote down.
38
"Accessing the Admin Tool" on page
"Accessing the Admin Tool" on page
29.
29.
DMS-CTC-20131021-0004 v1.0