Summary of Contents for Technicolor media access tg233
Page 1
Need more help? Additional help is available online at www.technicolor.com. *DSL37173390* QUICK INSTALLATION GUIDE DSL37173390 Technicolor MediaAccess TG233 TECHNICOLOR WORLDWIDE HEADQUARTERS 1, Rue Jeanne d'Arc 1 92443 Issy-les-Moulineaux France www.technicolor.com...
Page 3
Your gateway is a 5GHz gateway. You only need a Wi-Fi Media Bridge near your set-top box. Continue with “Step 4: Set up one Wi-Fi Media Bridge near your set-top box”. set-top box and TV Auto mode Technicolor Xtream or other 5GHz gateway...
Page 4
Step 3: Set up one Wi-Fi Media Bridge near your gateway 1 Make a wired connection to the Wi-Fi Media Bridge. 1 Connect one end of the Ethernet cable (this is the cable with the yellow connectors) to the yellow Ethernet port on the back of your Wi-Fi Media Bridge. 2 Connect the other end of the Ethernet cable to your gateway.
Page 5
2 Reposition the Wi-Fi Media Bridge slightly and try again. If you still have trouble connecting to the Wi-Fi Media Bridge, refer to the user manual on www.technicolor.com for more detailed information. Step 6: Optimize the link quality You may need to optimize the link quality of the Wi-Fi Media Bridge. To do this, check the color of the Link Quality LED on the front panel of the Wi-Fi Media Bridge near your set-top box.
Page 6
Orange: the link quality is average. Change the position of the Wi-Fi Media Bridge until the LED turns green. Red: the link quality is bad. Change the position of the Wi-Fi Media Bridge until the LED turns green or orange. Step 7: Optional: add an additional set-top box to the wireless network If you have more than one set-top box you wish to connect to the wireless network, simply repeat the procedure from “Step 4: Set up one Wi-Fi Media Bridge near your set-top box”...
Need help?
Do you have a question about the media access tg233 and is the answer not in the manual?
Questions and answers