How To Manually Connect Your Wireless Client - Technicolor TC8717C Setup And User Manual

Technicolor tc8717c mediaaccess
Table of Contents

Advertisement

2.4.2 How to manually connect your wireless client

Requirements
Your network device must be equipped with a Wi-Fi Certified wireless client.
Your network device must be configured to obtain an IP address automatically. This is the default setting.
Procedure
If you want to connect a computer using the wireless network, configure the wireless client on your computer with the wireless
settings printed on the Gateway's side or back panel label.
For the network name, two values are available:
Network Name 1 (SSID) is the network name of the 5 GHz access point and is of the following format:
HOME-XXXX-5 (where X is an alphanumeric character).
Network Name 2 (SSID) is the network name for the 2.4 GHz access point and is of the following format:
HOME-XXXX-2.4 (where X is an alphanumeric character).
The other values are common for both access points.
To configure these settings on:
Windows 8, proceed with
Windows 7, proceed with
Windows Vista, proceed with
Windows XP, proceed with
Mac OS X, proceed
On another operating system, consult the help of your wireless client or operating system.
22
or
Network Name 1 (SSID)
Network Name 2 (SSID)
Password
Encrytion
"How to connect your computer on Windows 8" on page
"How to connect your computer on Windows 7" on page
"How to connect your computer on Windows Vista" on page
"How to connect your computer on Windows XP" on page
with"How to connect your computer on Mac OS X" on page
: ***************
: ***************
: ***************
: ***************
23.
23.
25.
26.
24.
DMS-CTC-20131021-0004 v1.0

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TC8717C and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF