Power On The Gateway - Technicolor TC8717C Setup And User Manual

2.2 Power on the Gateway

Procedure
Proceed as follows:
1 Take the power cord that is included with your Gateway.
2 Connect the small end of the power cord to the Power port on the back of the Gateway.
3 Plug the other end of the power cord into an electrical outlet.
4 Wait at least two minutes to allow the Gateway to complete the start up phase.
DMS-CTC-20131021-0004 v1.0
SN: CPYYWWPPXXX
CM MAC: 00111100ABCD
Power
2 SETUP
17