Description; Specifications For G704B - Cherry G704B Instruction Manual

D E S C R I P T I O N
The Cherry G704B is a pneumatic-hydraulic tool designed specifically for the most efficient installation of CherryMAX® 3/4"
(19.05 mm) rivets. Its durable, all metal housing makes this extremely robust tool ideal for use in rugged shop
environments. This tool utilizes straight, offset and right-angle pulling heads, all of which can install -4, -5, and -6 diameter
CherryMAX® bulb type rivets in all head styles, materials and grip lengths. Extensions are available for extending the pulling
heads to reach limited access areas. See the section on pulling heads for the correct pulling head part number.
S P E C I F I C A T I O N S F O R G 7 0 4 B
Cherry Aerospace' (CHERRY) policy is one of continuous development. Specifications shown in this document may be subject to
change which may be introduced after publication. For the latest information always consult CHERRY.
AIR PRESSURE 90 PSI (6.2 bar) Min./ 110 PSI (7.6 bar) Max.
STROKE .510 Inch (12.954 mm)
PULLING FORCE 3100 Pounds (13.79 kn) @ 90 PSI (6.2 bar)
CYCLE TIME Approximately One Second
WEIGHT 4 1/4 Pounds (1.93 kg)
NOISE LEVEL 71 dB (A)
VIBRATION 2.5 m/s
AIR CONSUMPTION 3.9 CFM (110.5 liters/M) at 20 Cycles per Minute
3/4" (19.05 mm)
2
3