Summary of Contents for Cherry G704B
- Page 1 ORIGINAL INSTRUCTIONS Lightweight CherryMAX® Power Tool N S N 5130-01-393-1584 1224 East Warner Ave, Santa Ana, Ca 92705 Tel: 1-714-545-5511 Fax: 1-714-850-6093 www.cherryaerospace.com...
-
Page 2: Table Of Contents
T AB L E O F C O N T E N T S Description ....................................3 Specifications for G704B ................................3 Safety Warnings ..................................4 How To Use The G704B ................................5 Maintenance And Repair ................................5 Fill And Bleed Instructions ..............................6 Trouble Shooting ..................................6 Overhaul ....................................7... -
Page 3: Description
D E S C R I P T I O N The Cherry G704B is a pneumatic-hydraulic tool designed specifically for the most efficient installation of CherryMAX® 3/4" (19.05 mm) rivets. Its durable, all metal housing makes this extremely robust tool ideal for use in rugged shop environments. -
Page 4: Safety Warnings
Do not use substitute components for repair. Any modification to the tool, pulling heads, accessories or any component supplied by Cherry®, or their representatives, shall be the customer’s entire responsibility. Cherry® will be pleased to advise on any proposed modification. -
Page 5: How To Use The G704B
HOW TO USE THE G704B After selecting the proper pulling head and attaching it securely to the G704B, connect the air line to the tool. Insert the rivet stem into the pulling head until the head of the rivet is in contact with the pulling head sleeve. This will ensure full engagement between the jaws and the rivet stem and will prevent slippage. -
Page 6: Fill And Bleed Instructions
F I L L A N D B L E E D I N S T R U C T I O N S To replace a small amount of fluid in the tool, remove cap screw (14), attach the Cherry air bleeder (700A77), connect the tool to the air line and cycle several times. -
Page 7: Overhaul
OVERHAUL THE G701/G704KT TOOL KIT The disassembly and reassembly procedures can be accomplished by following the instructions below and the drawings on pages 8 & 9. Use extreme care during disassembly and reassembly not to mar, nick or burr any smooth surface that comes in contact with O- rings. -
Page 8: Handle Sub-Assembly
H AN D L E S U B - AS S E M B L Y Disconnect tool from air supply and remove parts (23) through (27). Place piston rod wrench (700A61) down into the top of the handle (30), into the hex socket in the head of the power piston rod (35). -
Page 9: Cross Section Drawing Of G704B
C R O S S S E C T I O N O F G 7 0 4 B... -
Page 10: Parts List For G704B Riveter
PART LIST FOR THE G704B (704-087) CHERRYMAX RIVETER ASSEMBLY ITEM NO. DESCRIPTION QTY. 704B35 SUB-ASSEMBLY, HEAD 704C19 SUB-ASSEMBLY, HEAD CYLINDER 704C18 CYLINDER, HEAD 704B2-2 FITTING, NOSE P-701 O-RING (.629, .489, .070) P-998 RING, BACK-UP (.609, .503, .053) 704C3 PISTON, HEAD P-931 O-RING (1.193, .987, .103) -
Page 11: Exploded View Of G704B
E X P L O D E D V I E W O F G 7 0 4 B... -
Page 12: Declaration Of Conformity
Declaration of Conformity We, Cherry Aerospace, 1224 E. Warner Ave., Santa Ana, CA 92705 declare under our sole responsibility that the product type G704B Serial No.- to which this declaration relates is in conformity with the following standards EN292 part 1 and part 2...