Assembly; Stage Plate Assembly; Plain Stage; Mechanical Stage - AMG evos User Manual

assembly

Figure 1

Figure 2

Figure 3


Figure 4

amgmicro.com





staGe plate assembly

plain staGe

The PLAIN STAGE assembly is pre-installed and pre-positioned at AMG.
Simply install the circular stage plate
 ..
stage

meCHaniCal staGe

For AME i2111/2 and AME 3205/6 Series (MECHANICAL STAGE) microscopes,
follow the procedures below before use.
1.
Screw in the 2 coarse positioning knobs
left-hand corners of the stage assembly.
2.
Remove the stage lock pin
Note: The stage lock pin
in place when transporting or moving the unit.

CHanGinG staGe plates (MECHANICAL STAGE)

1.
Unscrew the two 3 mm
a hex tool (included).
2.
coarse positioning knobs
Unscrew the 2
stage.
3.
stage plate
Carefully lift the
replace.
4.
Reattach all screws to secure.

power Cord assembly

1.
power switch
Turn the
the power cord (transformer unit).
2.
Insert the plug into the
microscope.
3.
Insert the 3-prong plug from the power supply into a power socket.
5
 into the round opening in the

into the front right and

on the back right-hand corner.

is used to secure/hold the mechanical stage

hex screws from the back of the stage with

from the front of the

off from the stage assembly and

to the "" (OFF) position before connecting

power outlet
on the back of the
(Figure 1)
(Figures 2 & 3)
(Figure 3)
(Figure 4)
eVos™ User Guide