Micron(Evos) Via Usb Connection; Installing Micron(Evos) Software; Installing Driver - AMG evos User Manual

operation
Figure 1

amgmicro.com

miCron(eVos) via Usb ConneCtion


The USB connection port
edited, and analyzed directly on a PC via a USB2 cable (included) with AMG's
Micron(EVOS) imaging software (included)

important! Install the software before attaching the
microscope to PC.
system requirements (Minimum)
PC with Pentium® IV 1.8 Ghz CPU or higher
X
Windows® XP Operating System
X
X 30 MB of hard drive space for application software
X One open USB 2.0 port
256 MB RAM
X

installinG miCron(eVos) software

1.
Insert Micron(EVOS) software CD into CD drive
2.
welcome dialog, click
At the
3.
At the License agreement dialog, select
continue.
4.
At the Select destination Location dialog, click
default application location to continue.
5.
At the Select additional tasks menu, choose desired placement of
available icons and click
6.
At the ready to install dialog, review and verify install settings and
install to continue.
click
7.
information screen, click
At the
8.
At the Completion screen, click

installinG driVer

1.
After installing Micron(EVOS), connect the microscope to a PC using
the USB2 cable (included).
2.
When prompted, browse to the Micron CD and select the installation
Cd drive:\westover Usb2 eVos installation disk.
disk folder:
11
allows images to be viewed, captured, saved,
(Intel® chipset preferred)
next to continue.
"i accept the agreement" to
next to accept the
next to continue.
next to continue.
finish to finalize software installation.
(Figure 1)
eVos™ User Guide