Image Capture Button - AMG evos User Manual

operation
Figure 1

imaGe CaptUre bUtton

The image capture button
microscope, directly behind the right focus control.
to saVe an imaGe on an sd™ Card:
1.
to capture/save an image on an sd card,
card slot located on top of the LCD display as described on page 9.
2.
Focus the image on screen to desired view.
3.
Press the

control.
4.
A
beneath the SD card slot for about 3 seconds to indicate that EVOS is
saving the image onto the memory card.
to saVe an imaGe on a pC Via miCron(eVos):
1.
to capture/save an image on a pC via micron(eVos),
SD™ card from the card slot (SD card is set as default for saving images).
2.
Connect the USB cable after the software has been installed as
described on page 11.
3.
Launch Micron(EVOS).
4.
Focus the image on screen to desired view.
5.
Press the
control.
6.
Choose file name and file location when prompted.
Note: Images are saved as Digital Negative (DNG) files that can be opened with
Micron(EVOS) or other Adobe® imaging applications. Files are 2048 x 1536
pixels in dimension and approximately 3MB in size.
10

is located on the right-hand side of the
image capture button
"StORInG:EVOS0000.DnG" display will flash on the LCD screen
image capture button
insert the card into the

located behind the right focus
remove the

located above the right focus
eVos™ User Guide
(Figure 1)