operation
Figure 1
Figure 2
Figure 3
amgmicro.com
meCHaniCal staGe operation
The free-motion "glide" stage operates and moves in all directions —
horizontally, vertically and diagonally.
1.
2.
3.
seCUre diGital (sd™) Card
The SD memory card slot is located on the top of the LCD display.
Note: Before using the SD card, format the disk/card by following the
manufacturer's format disk procedures.
1.
2.
3.
Maneuver the stage freely throughout its x-y range of motion using
the 2 coarse-positioning knobs
y-axis fine-positioning controls
Turn either of the 2
front to move the stage forward and toward the back to move the
stage backward.
x-axis fine-positioning control
Turn the
move the stage to the left and clockwise to move the stage to the
right.
protective rubber cover
Gently pull out the
Insert the
SD card
with the angled corner facing bottom left-hand
side (see figure 3) into the slot until it clicks and the card locks into
position.
Remove the card by pressing it down to release it from the slot.
Note: Do not remove SD card until "STORING: EVOS____.DNG" clears
from the LCD screen
9
.
toward the
counter-clockwise to
(Figures 2 & 3)
from the LCD frame.
eVos™ User Guide
(Figure 1)
Need help?
Do you have a question about the evos and is the answer not in the manual?