Swapping The Pip; Selecting An Input Signal Source For Pip; Pop (Picture-Out-Of-Picture: Channel Scan) - LG RU-17LZ20, RU-17LZ21, RU-17LZ22 Owner's Manual

Swapping the PIP

Swapping the PIP
Press the pip swap button to switch the main and sub pictures.
Main Picture Sub Picture

Selecting an Input Signal Source for PIP

Selecting an Input Signal Source for PIP
Use the pip input button to select the input source for the sub picture.
Each press of pip input button changes the PIP source.
Main Picture Source
TV, Video 1, Video 2, and S-Video
Component, and RGB-PC
POP (Picture-of-Picture: Channel Scan)
POP (Picture-of-Picture: Channel Scan)
- Use POP to search the programs of all the memorized channels one-by-one, while the main picture
source remains the current channel.
- Press the scan button in PIP mode. Each press of scan button changes the screen as shown below.
- Note: Run EZ Scan channel search before using POP mode.
* In Component mode, this POP
mode only operates.
Available Sub Picture Sources
Component,and RGB-PC
TV, Video 1, Video 2, and S-Video
Operation
29