LG M5201Cs User Manual page 6

Connecting to External Devices
1
Turn on power by pressing the power button on the product.
Turn on the PC.
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the SOURCE button on the bottom of the product.
SOURCE
A
When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
B
When connecting with a
• Select HDMI/DVI :
•
How to connect to two computers.
Note
Connect the signal cables (
Press the INPUT button on the remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
SET
AUTO/SET
HDMI to DVI
signal input cable.
HDMI to DVI
Digital signal.
HDMI to DVI
5
SOURCE
AUTO/SET
ON/OFF
Power button
Input
and D-Sub) to each computer.
Input