Advertisement
volume from a portable audio device. This value is the
highest volume that will be displayed on the volume
indicator.
The volume levels for each audio source can be assigned a
value from 0 (off) to 10 (max).
Use the up and down buttons to make any changes, and
press the center button to lock in the new value. The
Max. Volume output is factory set to 40, to conform
to EU standards. However you can increase this to a
maximum of 52; press the middle button to lock in any
changes. Note that some audio noise may appear at the
top loudness settings.
Finally, the Filter 15 kHz engages a filter which rolls off
higher frequencies when engaged. This is not needed for
normal operation and can be left off, which is the default
setting.
You can also access this audio mixer tool during a session
etc. by pressing the Volume + and – buttons at the same
time. Press the left button in this case to exit the Audio
Mixer screen.
KBS is another Deepak Chopra Dream Master session
type. See the KBS reference information at
www.mindplacesupport.com for more details.
5) Service
This screen provides technical details about your Deepak
Chopra Dream Master - you may be asked to provide
some of these details in the event that you require
support.
Where to find your Dream Master serial number
In the Settings section, select Service. Your serial number
follows the letters SN.
6
Advertisement
