Advertisement
ADVANCED OPERATION
This section describes in detail all of the Deepak Chopra
Dream Master settings, controls and features.
ENCODED AUDIO
SpectraStrobe
The Dream Master uses a new form of encoding,
SpectraStrobe™ (SS) which is similar to AudioStrobe® (AS)
but with six light control signals instead of just two. This
allows full red, green and blue light control for both the left
and right side of the Light Goggles, synchronized with the
audio content. Files created with this format offer a richer and
more subtle experience than does AS.
AudioStrobe
Your Deepak Chopra Dream Master is also a great
AS decoder that can map the two AS signals onto any
combination of red, green and blue via the ColorSets. Some
ColorSets morph their color mappings during a session,
creating a more dynamic and complex experience. See the
inside back cover fold-out for ColorSet details.
ColorOrgan
Just for fun there is also a ColorOrgan (CO) "Light Show"
option With the lights controlled by your music. It maps
low frequencies onto blue, mid frequencies onto green, and
higher frequencies onto red. There are three intensity levels
(50%, 100%, 200%) and response rates (fast and slow fade).
CO works best with music that has a beat, but can be quite
interesting with other genres - please experiment!
To use it, plug the Aux cable into the headphone port of you
player device and the other end into the Aux port on the top
left of the Dream Master. Then select and start the piece you
want to play. Then select Aux Audio and press the Up key.
You should see Mode ColorOrgan on the LCD. Use the Down
8
Advertisement
