Installing And Repositioning Headrest Pillow (Recliners Only) - Probasics EC03 Owner's Manual

Folding
1. Swing footrest/leg rest and calf pads (if equipped) in locked position to the front of
the wheelchair.
2. Pivot footplates upward to vertical position.
3. With both hands, grasp the middle of the seat upholstery at the front and back edge
and lift up.
4. Continue to close the wheelchair by grasping the back cane furthest from you and
pulling the armrest towards you.
Installing and Repositioning the Headrest Pillow
The headrest pillow fastens to the headrest extension by means of Hook and Loop
fasteners.
1. Align the headrest pillow the
loop fastener on the
headrest
2. Press firmly to attach the
pillow.
To reposition the headrest
3.
pillow, pull the headrest off
the headrest extension and
repeat steps 1 and 2.
Loop fastener
13
Headrest Pillow with hook
fasteners on back