How To Use The Nuna Chair; How To Disassemble The Nuna Chair - Nuna Zaaz Instruction Manual

How to use the
Nuna chair
adjusting the Seat Height
WARNING
DO NOT adjust the height of the chair while a child
is in the seat!
1 Slide down the lock behind the flap and lift the flap completely.
The seat automatically rises up to the highest position.
2 To lower the seat, keep the flap lifted completely and push down
firmly on the sitting surface of the seat until it reaches the
( 10 )
desired position.
3 Lower the flap down into position. Listen for the click as the lock
clicks back into position. The seat position is now locked.
Adjust the Harness Restraint and
Buckle
1 Don't forget to check and adjust the harness to fit your child snugly.
( 13 )
2 To lock the harness, insert each clip into the buckle and listen for a
( 14, 15, 16 )
click.
3 To release the buckle, push on the Nuna button at the center and
( 17 )
remove the two clips.
12
How to disassemble
the Nuna chair
remove the tray
1 Release the two clips on both sides under the tray.
2 Gently lift the tray upwards so that it clears the arm bar and
pull away from the back of the seat.
( 2 )
remove the arm Bar
1 Push the button on the front of the arm bar and pull the arm bar up to
release it from the seat.
2 Unhook the two ends from the backrest and remove.
Remove the Harness Restraint
WARNING
the harness restraint correctly fitted and adjusted.
The harness can be removed for cleaning or when the chair is used for an
older child.
Insert the Nuna key into each of the slots of the harness restraint
at the back and underside of the seat to release the plastic clips.
Pull on the belts to remove.
( 9 )
( 7 )
When used as a high chair, the child must always wear
( 11 )
( 6 )
13