Table of Contents
Advertisement
3.4
Network Connection
If the server is to be connected to a Local Area Network, in order to interface with other devices (e.g. IP cameras
and WaveView client software PCs), the server must have an IP address assigned to it
When the server is connected to a network and booted up for the first time, it will default to using a DHCP
address, and will wait to be assigned an address by the local DHCP server on that network.
Once the Wavestore server has been assigned an address, you can check this address by following the menu path
View ‐> Setup ‐> Advanced Configuration ‐> Execute Command, enter the text ip address, and click on Run. The IP
address will now be displayed as below:
Figure 3.8 Network Configuration Menu
WSUSA‐MAN‐0020‐001
20
Advertisement
Table of Contents
