1. Manuals
  2. Brands
  3. Inaxsys Manuals
  4. IP Camera
  5. IN-DO2MPTZ30X
  6. Hardware manual

Inaxsys IN-DO2MPTZ30X Hardware Manual

2mp outdoor speed dome with day/night, extreme wdr, super low light sensitivity, 30x zoom lens
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model#: IN-DO2MPTZ30X
2MP Outdoor Speed Dome with Day/Night,
Extreme WDR, Super Low Light Sensitivity,
30x Zoom Lens
Hardware Manual
2014/02/05

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IN-DO2MPTZ30X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Inaxsys IN-DO2MPTZ30X

Summary of Contents for Inaxsys IN-DO2MPTZ30X

  • Page 1 Model#: IN-DO2MPTZ30X 2MP Outdoor Speed Dome with Day/Night, Extreme WDR, Super Low Light Sensitivity, 30x Zoom Lens Hardware Manual 2014/02/05...

  • Page 2: Table Of Contents

    How to Use the Power Adapter ............... 35 How to Replace the Fuse ..............35 How to Attach the Safety Wire Strap ............37 How to Replace the Dome Cover ............39  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 3 2MP Outdoor Speed Dome with Day/Night, Extreme WDR, Super Low Light Sensitivity, 30x Zoom Lens Hardware User Manual Accessing the Camera ......... 41 Configure the IP Addresses ..............41 Access the Camera .................. 44  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 4: Precautions

    We cannot be held responsible for any typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 5 Technology Equipment according to European Standard EN 55022 and EN 55024. In a domestic environment, this product may cause radio interference in which cause the user may be required to take adequate measures.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 6: Safety Instructions

    Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine if the video product is in proper operating condition.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 7: Introduction

    2MP Outdoor Speed Dome with Day/Night, Extreme WDR, Super Low Light Sensitivity, 30x Zoom Lens Hardware User Manual Introduction List of Models This hardware manual contains the following model: 2MP Outdoor Speed Dome with D/N, Extreme WDR, Super IN-DO2MPTZ30X Low Light Sensitivity, 30x Zoom Lens  8272 Pascal Gagnon ...

  • Page 8: Package Contents

    Check if the following items come with the camera package. If any of them is missing, please contact your local sales agents. Camera Power Cord Power Adapter Cable Gland Conduit Gland Gland Rubber Rings (x2) Hex Screwdriver Screws Universal Plugs Safety Strap Quick Installation Guide  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 9: Physical Description

    The Ethernet port connects to a network using a standard Ethernet cable. 4) AC 24V Power Input This jack connects to the power adapter and power cord to supply power to the camera.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 10 This jack connects to an audio input device, such as a microphone with built-in amplifier. NOTE: Make sure that the connected audio input device has a built-in amplifier. Connecting an ordinary microphone will dwarf sounds and will result in inaudible recording.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 11: Installation

    2. Carefully lift the camera cover and place it aside. NOTE: The cover is attached to the camera by a metallic wire strap; do not abruptly lift the cover.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 12 2MP Outdoor Speed Dome with Day/Night, Extreme WDR, Super Low Light Sensitivity, 30x Zoom Lens Hardware User Manual 3. Remove the styrofoam and silicon bags from the camera. 4. Align the screw holes and tightly secure the screws using the bundled hex screwdriver.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 13: Step 2: Mount The Camera

    Suitable when mounting the Outdoor PTZ on a vertical pole. Mount IN-X0309 IN-X0503 Corner Suitable when mounting the Outdoor PTZ on a corner wall. Mount IN-X0309 IN-X0402  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 14: How To Mount The Outdoor Ptz

    See Step 3: Waterproof the Cable Connections on page 17. DISCLAIMER: The manufacturer will not be responsible for camera damage caused by water entering the cable connections.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 15 3. For added security, attach the safety wire strap to the camera and the mounting solution. See How to Attach the Safety Wire Strap on page 37 for detailed instructions.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 16 2MP Outdoor Speed Dome with Day/Night, Extreme WDR, Super Low Light Sensitivity, 30x Zoom Lens Hardware User Manual Below is an example of mounting the camera using pendant mount with the cables inside the ceiling.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 17: Step 3: Waterproof The Cable Connections

    (not included in the package). How to Waterproof the Cable Using How to Waterproof the Cable Using the Conduit Gland on page 22. the Cable Gland on page 18.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 18: How To Waterproof The Cable Using The Cable Gland

    2. Detach the cable gland as shown below. Gland Body Clamping Nut Sealing Rubber and Claw 3. Insert the clamping nut through the Ethernet cable.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 19 6. Attach the gland body to the Ethernet port of the camera. IMPORTANT! Make sure the rubber ring is completely aligned and flat on the gland body to avoid possible water leakage.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 20 9. Attach the clamping nut to the cable gland body. Make sure the clamping nut is tightly secured and the rubber is squeezed in to avoid water leakage.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 21 How to Use the Junction Box on page 26). DISCLAIMER: The manufacturer will not be responsible for camera damage caused by improper use of the power adapter.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 22: How To Waterproof The Cable Using The Conduit Gland

    2. Detach the conduit gland as shown below. Gland Body Clamping Nut Sealing Rubber 3. Insert the Ethernet cable through the flexible conduit. Then insert the clamping nut through the flexible conduit.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 23 6. Attach the gland body to the Ethernet port of the camera. IMPORTANT! Make sure the rubber ring is completely aligned and flat on the gland body to avoid possible water leakage.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 24 8. Insert the sealing rubber into the conduit gland body. 9. Attach the clamping nut to the conduit gland body. Make sure the clamping nut is tightly secured to avoid water leakage.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 25 How to Use the Junction Box on page 26). DISCLAIMER: The manufacturer will not be responsible for camera damage caused by improper use of the power adapter.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 26: How To Use The Junction Box

    3/4" gland (flex conduit and gland not included in the package) and through one of the holes of the junction box. Then connect the necessary cables. Hole size = 3/4"  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 27 Install a female power socket (not included) inside the junction box to plug the cord and power up the camera. Below is an example of the installing the camera using the Heavy Duty Wall Mount and Junction Box.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 28 2MP Outdoor Speed Dome with Day/Night, Extreme WDR, Super Low Light Sensitivity, 30x Zoom Lens Hardware User Manual  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 29: Step 4: Connect The Equipment

    Note: Use only the supplied power adapter and power cord that came with the camera or the optional High PoE Injector available for purchase. Using other accessories not approved by the manufacturer may cause damage to the equipment.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 30: Other Connections And Accessories

    For example, you can connect an “alarm horn” to the camera; as such when an event occurs inside the camera (e.g. detected intruder), the alarm horn will sound. Other common DO device applications are motion-triggered lights, electric fence, magnetic door locks, etc.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 31 Blue Digital Output 2 (DO2) NOTE: In case of connecting two (2) DO devices, the 12V pin can be commonly shared by the two (2) DO devices.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 32 Consequently, to connect a second DI or DO device, use the Black (GND) and Green (DI2) cables to connect the second DI device, and the Red (12V) and Blue (DO2) cables for the second DO device.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 33 The triggering circuit voltage has to be around 12V DC and the switch-controlled circuit voltage has to match the external power supply (e.g. 110V AC or 220V AC).  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 34 The illustration below is a graphic example of connecting a relay to a high voltage DO device. 110V-220V AC External Power Source Relay (DO1 Device) Outdoor PTZ Illuminator  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 35: How To Use The Power Adapter

    1. Use a flat-head object, such as a screwdriver, to pull and remove the fuse holder from the power adapter. 2. Remove the main fuse from its bay and pull to retrieve the replacement fuse.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 36 Replacement Fuse 3. Push the replacement fuse onto its bay. 4. Insert the fuse holder back into the power adapter and push until it locks into place.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 37: How To Attach The Safety Wire Strap

    2. Insert the screw through the smaller end of the safety wire strap and attach it to the camera. 3. Remove the safety screw from the mounting solution (below is an example of the straight tube).  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 38 4. Align the bigger end of the safety wire strap on the mounting solution and then tightly attach the screw to lock the safety wire strap in place.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 39: How To Replace The Dome Cover

    2. Carefully lift the cover. Using a screwdriver, remove the screw to detach the cover from the camera. 3. Prepare the replacement dome cover. Below is an example of the smoke vandal proof cover.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 40 4. Attach the dome cover to the camera by securing the screw through the wire strap. 5. Tighten the four (4) screws to close the dome cover.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 41: Accessing The Camera

    Double-click the mouse on the camera model name, the default browser of the PC is automatically launched and the IP address of the target camera is already filled in the address bar of the browser.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 42 The camera model name is shown on the list. Click on the IP address to automatically launch the default browser of the PC with the IP address of the target camera already filled in the address bar of the browser.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 43 DHCP server to assign unique IP addresses to each of them, all of the cameras would then have the initial IP address of 192.168.0.100, which is not  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

  • Page 44: Access The Camera

    Now that the camera and the PC both have their unique IP addresses and are under the same network segment, you can use Microsoft Internet Explorer on the PC to access the camera.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 45 The following examples in this manual are based on Internet Explorer browser in order to cover all functions of the camera.  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...
  • Page 46 HTTP port of the camera is 80, which can be omitted from the address for convenience. Before logging in, you need to know the factory default Account and Password of the camera. Account: admin Password: 123456  8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com...

Table of Contents