Table of Contents
Advertisement
1. Read all safety and operating instructions before using the unit.
2.
Read warnings on additive containers.
3.
Ventilate work area when using toxic or pungent additives to reduce your exposure to
toxic fumes.
4.
Use proctective wear, especially for the eyes and skin.
5.
Be careful of slippery oors. Some additives make a normally safe area extremely slippery
and dangerous.
6.
Keep children away from the machine and wash area.
7.
Do not change nozzle size. Each machine is designed to operate with a speci c size
nozzle. An incorrect nozzle could cause excessive pressure resulting in pump damage
and possible personal injury. Refer to parts list for correct nozzle size.
8.
Do not point the nozzle where damage or injury could result. Eg. eyes, skin, people,
animals. The water discharge from this unit is under extremely high pressure.
9.
Do not point the nozzle toward an electrical outlet as you risk severe shock and personal
injury.
10. Use only recommended No. 1 or No. 2 fuel oil in this unit. Do not use gasoline, crankcase
drainings, or oil containing gasoline or solvents.
11. Never run the unit in an enclosed area. Exhaust fumes are poisonous. Ensure all areas
are properly vented in accordance with local regulating and/or CSA standard B139.
12. Whenever you stop spraying, always engage the safety latch on the trigger gun.
13. Whenever changing nozzles, always turn the engine o and always relieve the pressure
by triggering the gun. Always engage the safety latch on the trigger gun. Always change
the nozzle with the gun and wand pointed away from you, and never pointed at any
person or animal.
WARNING - risk of injection or severe injury. Keep clear of nozzle. Do not direct
discharge stream at persons. This equipment is to be used only by trained operators.
IMPORTANT SAFETY INSTRUCTIONS
1
SERIES
GF
Advertisement
Table of Contents
