Windows Xp Users; Windows 2000 Users - D-Link DFE-690TXD Installation Manual

Finishing the Windows Installation
To complete the installation of the DFE-690TXD:
Make sure that the DFE-690TXD CD-ROM is inserted in the CD-ROM
drive
The DFE-690TXD is inserted into your laptop
The laptop is turned ON
See the section below that corresponds to your Operating System to
complete the installation:

Windows XP Users

Windows XP completes the installation of the DFE-690TXD
automatically. A "Found
New Hardware" message
will appear in the task bar
to indicate that the
installation is complete.

Windows 2000 Users

Windows 2000 completes the installation of the DFE-690TXD
automatically. When the "hour glass" disappears, the installation is
complete.
Windows Me & 98/98se Users
Windows Me & 98/98se installs the drivers automatically.
If a "Version Conflict" screen appears, select "Yes" to use the newer file
and continue.
A screen will appear asking you to restart your computer. Select "Yes" to
restart your computer and complete the installation.
-6-