Table of Contents
Advertisement
IP camera visited/ controlled by LAN
1
Setup IP address
1.1 Connect IP Camera to internet (or PC), then turn on the power on IP Camera, shown as above. IP address can
be searched via update software(software upgrading tool,named upgrade_En.exe in small CD in package). shown
as below:
Run upgrade_En.exe (UPGRADE v1.8) by CD-Rom, click [Search].The software will show the current LAN
camera's IP address, subnet mask number, network gateway number and camera MAC serial number etc, shown as
below:
Picture 1.2 Connect by router /interchanger
40
Advertisement
Table of Contents
