Maintenance Guide - Bolens TEN-FIFTY 192-02 Owner's Operation And Maintenance Manual

Table of Contents

Advertisement

Figure 8
Figure 9
Refer to enclosed Engine booklet for replacement
specifications.
Check battery water level
Check air in tires (page 5)
Check engine crankcase oil
Drain engine crankcase oil
PNEUMATIC TIRE PRESSURES - Maintain pressure
in tires as recommended here. Ideal pressure will
depend upon load carried. Heavier loads require
higher inflation. Check pressures with a low pres-
sure gauge having one-pound graduations. Operating
with pressures below pressures given here may
damage tires.
TIRE
FRONT
REAR
Tire pressure must be the same on one side as the
other, or else the tractor will ride unevenly and at-
tachments such as the rotary mower will not cut
level. Remember, also, that tire pressure, weight
of the operator, or a combination of the two will af-
fect the riding height of the tractor and this, in turn,
will affect the cutting height of the rotary mower.
A WISCONSIN ENGINE IS USED WITH YOUR HUSKY
1050. A separate book, prepared by the engine man-
ufacturer, is supplied with your HUSKY tractor,
giving detailed instructions on operation, mainte-
nance and repair of the engine. It is important that
the engine book be studied thoroughly and its in-
structions carefully carried out since proper care of
the engine is vital to the efficient operation and long
life of your HUSKY tractor.

MAINTENANCE GUIDE

AFTER EVERY
10 HOURS
OF OPERATION
X**
SIZE
PRESSURE (lbs./sq. in.)
16x6.50-8
8 PSI
8x8.50-12
8 PSI
Figure 10
AFTER EVERY
AFTER EVERY
25 HOURS
50 HOURS
OF OPERATION
OF OPERATION
X**
X
X
7

Advertisement

Table of Contents
loading

Table of Contents