Installation And Setup; Tv Connection - LG LHT799 Owner's Manual

Installation and Setup

TV Connection

Make one of the following connections, depending on
the capabilities of your existing equipment.
Tips:
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
connections described below.
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
Make sure the DVD/CD Receiver is connected
directly to the TV. Select the correct AV input on
your TV.
Do not connect your DVD/CD Receiver to the TV
via your VCR. The DVD image could be distorted
by the copy protection system.
Rear of DVD/CD Receiver
MONITOR
Y
COMPONENT VIDEO (PROGRESSIVE SCAN)
V
VIDEO COMPONENT VIDEO /
INPUT PROGRESSIVE SCAN INPUT
L
Rear of TV
8
INPUT
L - AUX - R
HDMI OUT HDMI OUT
XM IN
P P
B R
i Pod
OUT PUT
C
Y
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable (V).
Component Video connection
Connect the COMPONENT VIDEO OUT jacks from
the DVD/CD Receiver to the corresponding jacks on
the TV using a Y P P cable (C).
B R
If your television is a high-definition or "digital
ready" television, you may take advantage of the
DVD/CD Receiver's progressive scan output for the
highest video resolution.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner's manual for TV then set the resolution
that your TV can accept.
Note:
The HDMI mode must be set to OFF for VIDEO OUT
and Component video connections.