LG DRT389H User Manual page 19

Lg dvd recorder user manual
Table of Contents

Advertisement

DR386M-P.BGBRLLK_ENG
6/13/08
Adjust the language settings
Display Menu – Select a language for the Setup menu and on-screen display.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then OK( ) to
enter the corresponding 4-digit number according to the language code list
on page 36. If you make a mistake while entering number, press CLEAR to
delete numbers.
[OFF] (for Disc Subtitle): Turn off Subtitles.
DTV Audio – Digital channels sometimes provide multiple audio tracks, often in a
different language. You can set a default audio language with this setting.
If provided by the broadcaster, you can also select a different audio language
while viewing TV by pressing AUDIO repeatedly.
DTV Subtitle – Digital channels sometimes provide subtitles, often in a different
language. You can set a default subtitle language with this setting, if DTV subtitle
is provided by the broadcaster.
Press SUBTITLE repeatedly to select a subtitle language whilst viewing a digital
TV channel.
DivX Subtitle – Select a language code for the DivX
9:59 AM
Page 19
®
subtitle.
Adjust the audio settings
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITAL AUDIO OUTPUT jack.
[Bitstream]: Select this when you connect this DVD recorder's DIGITAL
AUDIO OUTPUT jack to an audio component with a built-in Dolby Digital,
DTS or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select this when you connect this DVD
recorder's DIGITAL AUDIO OUTPUT jack to an audio component without a
built-in Dolby Digital or MPEG decoder.
[Off] (for DTS): Select this when you connect this DVD recorder's DIGITAL
AUDIO OUTPUT jack to an audio component without a built-in DTS decoder.
Sample Freq. (Frequency) – Selects the sampling frequency of the audio
signal.
[48 kHz]: The audio signals are always converted to 48 kHz.
[96 kHz]: The audio signals are output in their original format.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents