Wi Digital Systems Wi AudioStream Pro Quick Start User Manual page 3

Pairing
1. First turn ON the transmitter (Tx) and the
receiver (Rx) units by pressing and
holding the POWER button
of the units for 2 seconds.
2. Press and hold the LINK button
transmitter (Tx) for 3 seconds. The Power/
Status LED on the transmitter will start fast
flashing. The transmitter is now in a Pairing
mode and ready to search for the receiver.
3. Press and hold the LINK button
receiver (Rx) for 3 seconds. The Power/
Status LED on the receiver will start fast
flashing. The receiver is now in a Pairing
mode and ready to be found by the
transmitter.
4. Once the transmitter links with the receiver
the Power/Status LED on both devices will
turn to solid Green.
z
(Only If Needed)
(Rx)
v
,
k
v
p
z
(Tx)
r
p
on each
on the
on the
k