Summary of Contents for Wi Digital Systems Wi AudioStream Pro
Page 1
QUICK START USER GUIDE Wi AudioStream Pro w w w . w i d i g i t a l s y s t e m s . c o m...
Page 2
Charging Plug the AC Charger into a power socket. Connect the USB Y-Split power cable to the USB port on the AC Charger. Connect one of the two mini USB connectors into the transmitter USB port. Connect the second mini USB connector into the receiver USB port.
Page 3
Pairing (Only If Needed) First turn ON the transmitter (Tx) and the receiver (Rx) units by pressing and holding the POWER button on each of the units for 2 seconds. Press and hold the LINK button on the transmitter (Tx) for 3 seconds. The Power/ Status LED on the transmitter will start fast flashing.
Wireless Microphone Setup (Tx) PLEASE READ FIRST Set Transmitter to Mono Mic-in Mode (fast blue LED flashing) for operation with ear worn microphones. Refer to back of transmitter for additional information. Transmitter Connection Always route Audio Input Jack (Tx) Audio Cable the audio cable beneath Tx &...
Page 5
In-Ear Monitoring Setup (Tx) PLEASE READ FIRST Set Transmitter to Line-in Stereo Mode (two blue LED flashes) for operation with earphones. Refer to back of Transmitter for additional information. Transmitter Connection Stage Monitoring Music Listening from Computer Audio Input (Tx) Jack Computer Headphone Jack...
Page 7
Wi Transmitter 1. Audio IN Jack 7. Link/Pairing 2. Power ON/OFF 8. Lock 3. Power/Status LED 9. Operation Mode 4. Volume UP 10. USB Audio Interface & 5. Volume Down Charging Port 6. Mute 11. Belt Clip...
Transmitter Button Function Function Button Hold LED Status Power ON/OFF 2 sec Solid Green POWER Pairing Mode 3 sec Fast Green Flash LINK Volume UP Click Volume Down Mute ON/OFF 1.5sec Solid Green & Blue Lock Keypad 2 sec Solid Green Only Unlock Keypad Click Solid Green &...
Page 9
Wi Receiver 1. Audio OUT Jack 7. Next Track 2. Power ON/OFF 8. Previous Track 3. Power/Status LED 9. Mute/ Play/Pause 4. Volume UP 10.USB Charging Port 5. Volume Down 11. Belt Clip 6. Link/MIC *Functions are activated when Transmitter is connected to a USB Port...
Page 10
Receiver Button Function Function Button Hold LED Status Power ON/OFF Solid Green 2 sec POWER Pairing Mode Fast Green Flash 3 sec LINK MIC On/Off Click 2 Blue LED Flashes / Solid Green LED Volume UP Click Volume Down Mute ON/OFF Solid Green &...