LG LDX-514 Owner's Manual page 41

Symptom
The DVD+VCR does No disc is inserted.
not start playback. No tape is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
The Rating level is set.
Is the cassette compartment empty?
Video tape cannot be
inserted.
No Hi-Fi sound
Audio mode is not set properly.
There is an obstacle in the path of the
The remote control
remote control and this unit.
does not work properly.
The batteries in the remote control are
exhausted.
The remote control is not pointed at
the remote sensor of the DVD+VCR.
The remote control is too far from the
DVD+VCR.
This remote control use the same
buttons for VCR and DVD functions
(ex.PLAY).
Camcorder image is
Camcorder is off.
not shown.
Camcorder image via
DVD+VCR SOURCE SELECT is not
AV input to DVD+VCR
set to LINE1 or LINE2.
is not shown on TV
screen.
Timer recording is not
Clock in DVD+VCR is not set to
possible.
correct time.
Timer has been programmed
incorrectly.
programming timer.
Cause
indicator light does not appear after
Correction
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
Insert a playable disc. (Check the disc
type and Regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Rating function or change
the Rating level.
Eject the tape in.
Select STEREO by repeatedly pressing
AUDIO on the remote control.
Remove the obstacle.
Replace the batteries with new ones.
Point the remote control at the remote
sensor of the DVD+VCR.
Operate the remote control within 23ft
(7m).
When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
Turn camcorder on and operate
properly.
Press INPUT to select LINE input
channel (LINE1 or LINE2).
Set clock to correct time.
Reprogram Timer.
Reprogram Timer and turn DVD+VCR
off to enable timer.
41