Connecting An Antenna Or Cable Tv; Basic Tv Connections - LG LDX-514 Owner's Manual

Connecting an
Connecting an
or Cable TV
or Cable TV
a Antenna a
:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your DVD+VCR. If your antenna cable is
flat connect it to a 300-ohm to 75-ohm antenna adap-
tor (not supplied) and slip the adaptor over the
ANT.IN jack. Don't attempt to screw it into to the
DVD+VCR.
b b Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the DVD+VCR. If a
converter is required connect a coaxial cable from the
wall jack to the IN connector on the converter, and a
coaxial cable from the OUT connector on the convert-
er to the ANT.IN on your DVD+VCR. This cable
hookup permits both TV and DVD+VCR operation.
a
Antenna
Rear of DVD+VCR
b
12
Antenna
Antenna
Antenna
OR OR
To view or record a CATV channel
1. Tune the TV to the DVD+VCR output channel
(CH 3 or 4).
2. Set the DVD+VCR channel selector to the cable
output channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
With this connection, you cannot record one program
•
while viewing another.
If you are using a cable box to tune channels, it is not
•
necessary to do Auto Channel Set.

Basic TV Connections

Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Rear of TV
ANTENNA VIDEO
AUDIO INPUT
INPUT
INPUT
R
L
R V A1
Rear of DVD+VCR
C
Pr
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
Rear of TV
A2
Pb Y
R L
AUDIO INPUT