Table of Contents
Advertisement
3. Turn the glasses on.
4. Wait until the computer has installed the necessary drivers for device
recognizion.
5. When the glasses storage drive shows up, open the drive.
6. Create a new text file named "time.txt".
7. Open the file with Windows
kind and input date and time as follows:
- yyyy.mm.dd hh:mm:ss (Note the blank space between date and
time)
8. To show or hide the date/time add the following flags behind the
time/date string (Note the blank space between timestring and flag):
- "y"(yes) to show
- "n" (no) / or nothing
9. Save it and then eject the USB storage drive safely.
10. Time is set and the glasses are ready for recording.
Notepad or a text editor of the same
®
2013.06.10 16:53:05 y
2013.06.10 16:53:05 n or
2013.06.10 16:53:05
Quick synch setup – synch time with computer time
Read chapter "8. Connecting to a computer" before you connect
the glasses to your computer.
1. Enter the glasses storage drive. Open the folder "computer current
date and time setting" under directory and enter:
- *disk\ dCIm\manual and driver\computer current date and
time setting
2. Double click on the file "time.bat ".
3. Navigate back to the root directory. There is a file named "time.txt"
built up.
4. To show or hide the date/time please see chapter "Adjust / show /
hide date and time".
5. Eject the glasses storage drive via your computer, or press and hold
the ON/OFF button for 2 seconds to turn the glasses off.
6. When you record new video the set time and date will be added to
the recorded video. Time and date are additionally synchronized with
your computers date and time settings.
11
Advertisement
Table of Contents
