Table of Contents
Advertisement
7. basIC oPeraTIon
Turn glasses on / start video recording
To turn on the glasses, simply press the ON/OFF button for 2 seconds.
The green LED at the inside of the left frame temple will turn on and the
device enters initialization.
After 2 – 5 seconds, the green LED flashes 3 times fast, and the recording
is started automatically. During recording the LED flashes slowly.
stop video recording / turn glasses off
To stop recording press the ON/OFF (5) button once. The green LED
shines steadily. To turn off the glasses, press and hold the ON/OFF
button for about 2 seconds. The glasses will automatically save the
recorded file and then turn off. The green LED goes out.
The file size per recording is limited to 15 minutes. A new file is
allocated after 15 minutes of recording is reached.
10
storage
The device supports a built-in memory up to 4 GB.
auto shut-off
When battery is low or the memory capacity is reached, the green LED
will blink very fast for approx. 30 seconds. The glasses stop recording
and then turn off.
adjust / show / hide date and time
This device can display the current date and time in your videos.
To set this function:
1. Turn the glasses off.
2. Connect the glasses to your computer. To do so, connect the USB-
TV-Out cable to the USB connector (7) and a suitable USB port of
your computer.
Advertisement
Table of Contents
