Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Braun Champion
Summary of Contents for Braun Champion
- Page 1 User Manual...
- Page 2 Thank you for buying the Wi-Fi DV. Before using this product, please read the manual carefully to maximize its performance and extend the life of the product. Overview and Controls...
- Page 3 1. Shutter button 2. Microphone 3. LCD display 4. Lens 5. Wi-Fi switch and status indicator (red) 6. Power/Mode button 7. Infrared signal reception 8. Micro USB port 9. Mini HDMI port 10. microSD card slot 11. External microphone 12. Battery cover opening button 13.
- Page 4 Camera mode Video recording mode (default) Wi-Fi icon (displayed when enabled) microSD card icon (displayed when inserted) Resolution icon: In camera mode, HI stands for 8 Mega Pixels (3264x2448), and in video recording mode it stands for FHD (1920x1080, 30fps); In camera mode, LO stands for 5 Mega Pixels (2592x1944), and in video recording mode it stands for 720P (1280x720, 30fps);...
- Page 5 Working Mode Flow Chart After turning on the DV, press the Power/Mode button to cycle through the following modes: Video preview mode (1080P default) Video mode (720P, 30fps) Video mode (720P, 60fps) Camera mode (8MP) Camera mode (5MP) In video mode, press the Shutter button to start recording, the LED flashes; press it again to stop; In camera mode, press the Shutter button to take a photo.
- Page 6 Use the Wi-Fi DV When using the DV for the first time, please: 1. Insert a microSD or microSDHC card, as shown in the following picture. English English TF Card TF Card High speed card at least Class 4 is recommended; when using the time delay function or recording video in professional mode, then a Class 10 card is required.
-
Page 7: Using The Battery
2. Using the Battery 2.1 Installing the Battery Please install the lithium battery correctly as shown in the following graphic. Figure 1 Figure 2 Figure 3 Figure 4 Step 1. Push the battery cover switch in lock position ( ), and remove the battery cover as shown in Figure 1. Step 2. - Page 8 Charging the Battery The DV uses a removable rechargeable lithium battery. When the DV is off, connect it via USB cable to a PC to charge the battery. During the charging cycle the status indicator (blue) will light up; the indicator turns off when charging is completed. Note: When the DV is on, connection to a PC will not start the charging cycle.
- Page 9 button for about 3 seconds, the LCD displays “OFF” and a beep can be heard from the buzzer. 2. Turn off: Press and hold the Note: The DV will turn off automatically if it is idle for 5 minutes. Use Instructions Default setting: After turning on the DV, the default setting is as below: Video recording mode The DV is in video recording mode.
- Page 10 The DV is in Mute mode; no beep will be heard when pressing the buttons. Displayed only Mute icon when Mute mode is activated. Wi-Fi icon Displayed when activated. Shooting modes. The DV provides different shooting modes. Press the button repeatedly, the following first two modes will show on the DV screen, and other models display on the APP operation.
- Page 11 until it appears.
- Page 12 Start recording:Press and release the button, the icon and [:] are flashing on the LCD. At the same time the red indicator will flash too; recording is in process. Stop recording:Press and release the button, the icon and [:] will stop flashing on the LCD. At the same time the red indicator will stop flashing;...
- Page 13 of video will be deleted to release the corresponding space for continuous recording. When the car stalls or you pull out the car charger, it will stop recording and save the video, will power off in 10s automatically. Note: You cannot open WIFI and do any button operation when in vehicle mode.
- Page 14 Enable/Disable Wi-Fi Wi-Fi is disabled by default. Press the Wi-Fi button on the side of the DV to enable. When connecting to a Wi-Fi network, the indicator will flash, and when a Wi-Fi network is connected, the indicator will remain on; the Wi-Fi icon will be displayed on the LCD (for saving power, Wi-Fi will be automatically disabled if no access point is connected after 60 seconds).
- Page 15 Enable/Disable Mute Mode The buzzer is enabled by default. In Video or Photo mode, press and hold the Shutter button to disable the buzzer and indicator to enter Mute mode. In Mute mode, the icon is displayed; press and hold the Shutter button again to exit the Mute mode. Buzzer is enabled by default When Mute mode is enabled, the Mute icon is displayed on the LCD...
- Page 16 English English HDMI cable HDMI cable Note: Before connecting or removing the HDMI cable, please stop video recording, playback and disconnect Wi-Fi first. When HDTV is connected, it enters playback mode, the LCD displays as below:...
- Page 17 Icon name Description Currently in playback mode. Playback mode There are 31 files and you are viewing the 19 one. File number Video icon The file is a video. In playback mode, press the Power button to toggle between photos and videos. When there are several photos or videos, press the Wi-Fi button to select the photo or video.
- Page 18 Connecting to PC Turn on the DV and connect it via the supplied USB cable to a USB port of the PC. The DV will enter U-disk mode and the LCD will display as below after connection: Now you can view the photos or videos taken by DV on PC. Note: After the DV was connected to PC and has entered U-disk mode, you will see two removable disks displayed in My computer of Windows;...
- Page 19 Note: No driver is required for web cam mode (PCC mode) under Windows XP (SP3) version or above.
- Page 20 Remote Control App Buttons Power off butt Video button Signal transmission port Signal transmission port POWER key POWER key SNAP key SNAP key REC key REC key Instructions You can use the remote control to record videos, take photos and shut down the DV. When using the remote control, aim the signal emission port to the infrared signal receiver of the DV, and press the video button, photo button or power off button.
- Page 21 Infrared signal App (supports Android and iOS) How to Install an App Search for “SYMAGIX” in Google Play (for Android OS), or scan the QR code printed on the gift box to find the app and install it according to instructions. Search for “SYMAGIX”...
- Page 22 2.2 Insert the microSD card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi icon on the LCD. 2.3 Enable Wi-Fi on your smartphone or tablet and search for wireless AP signal Champion, then connect to DV, until the system displays “Connected successfully”.
- Page 23 3.2 Insert the microSD card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi icon on the LCD. 3.3 Enable Wi-Fi on your iOS phone or tablet and search for wireless AP signal Champion, then connect to DV, until the system displays “Connected successfully”.
- Page 24 1. DV battery icon 2. Video resolution 3. White balance 4. Setup (enter setup menu) 5. Enter playback mode 6. Shutter button 7. Photo mode 8. Video mode...
- Page 25 Note: 1. A microSD card must be inserted if you want to take a photo, record a video, or download files. 2. The Wi-Fi indicator will remain on when the terminal is connected to DV. Waterproof Case Before sealing the waterproof case, keep the camera housing’s rubber seal clean, a single hair or grain of sand can cause a leak. You can test by closing the case without inserting the camera.