Symbol QRG 7875 Manual page 13

Q u i c k
other communication protocols, both switches must be toward the
back (customer side) of the unit.
AUX PORT/
DATACHKR
DATACHKR
RS-232
Switches
Installing 7875 into Checkstand Cutout
Grasp the 7875 Scanner/Scale and lower it into the checkstand
cutout. Be careful not to damage any of the cables. After the unit is
properly sitting on its supports, install the Top Plate.
Note: It is important that the 7875 does not rock on its sup-
ports. Make sure all adjustable supports are securely
fastened and that the 7875 is sitting on all supports.
R e f e r e n c e
SCANNER
OCIA/IBM
Make sure power is
off before changing
switch setting
RS-232
11