Speed Automatic; Transfer Case) - Chevrolet 2012 Tahoe Owner's Manual

Chevrolet 2012 tahoe/ suburban
Hide thumbs Also See for 2012 Tahoe:
Table of Contents

Advertisement

Excessively shifting the transfer
case into or out of the different
modes may cause the transfer case
to enter the shift protection mode.
This will protect the transfer case
from possible damage and will only
allow the transfer case to respond
to one shift per 10 seconds. The
transfer case may stay in this mode
for up to three minutes.
Four-Wheel Drive (Single

Speed Automatic

Transfer Case)

If the vehicle has four-wheel drive,
you can send the engine's driving
power to all four wheels for extra
traction. Read the following before
using four-wheel drive.
Notice: Driving on clean, dry
pavement in Four-Wheel Drive
High for an extended period of
time may cause premature wear
on the vehicle's powertrain. Do
not drive on clean, dry pavement
in Four-Wheel Drive High for
extended periods of time.
While driving on clean dry pavement
and during tight turns, you may
experience a vibration in the
steering system.
Front Axle
The front axle engages and
disengages automatically when you
shift the transfer case. Some delay
for the axle to engage or disengage
is normal.
Driving and Operating
Automatic Transfer Case
The transfer case knob is located
to the left of the instrument panel
cluster.
Use this dial to shift into and out of
four-wheel drive.
The vehicle has Four-Wheel Drive
®
with StabiliTrak
. For information on
StabiliTrak, see StabiliTrak
on page 9 45.
9-41
®
System

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2012 suburban

Table of Contents