Chevrolet 2012 Tahoe Owner's Manual page 117

In Canada, the law requires that
forward-facing child restraints have
a top tether, and that the tether be
attached.
If the child restraint does not have
the LATCH system, you will be
using the safety belt to secure the
child restraint in this position. Be
sure to follow the instructions that
came with the child restraint. Secure
the child in the child restraint when
and as the instructions say.
If more than one child restraint
needs to be installed in the rear
seat, be sure to read Where to Put
the Restraint on page 3 51.
The vehicle's lap shoulder belts
for the first and second row
seating positions are equipped
with free falling latch plates.
If the vehicle has a third row,
the lap shoulder belts have either
free falling or cinching latch plates.
Use the following pictures to
determine the latch plate style:
Free Falling Latch Plate
Seats and Restraints
Cinching Latch Plate
1. Put the child restraint on
the seat.
2. Pick up the latch plate, and run
the lap and shoulder portions of
the vehicle's safety belt through
or around the restraint. The child
restraint instructions will show
you how.
3-61