LG RLM10 Owner's Manual page 15

2. The screen shows
and All LEDs are turned on.
"HOME CODE CLEAR IS PROCESSING..." will display
on the LCD.
3. The Home Code becomes cleared automatically.
After showing
automatically turned off.
"HOME CODE CLEAR IS PROCESSING....DONE."
will display on the LCD, then the machine is
automatically turned off.
4. Home Code clear is completed.
5. Set the Home Code on the RLM.
(See Page 13, Setting the Home Code)
If you replace the monitor, you must reset the
Home Code. (See Page 13, Setting the Home
Code)
as the power turns on,
for 3 seconds, the machine is
15