Lenovo ThinkPad Edge E145 User Manual page 100

Table 4. Config menu items (continued)
Menu item
Display
Power
Beep and Alarm
Serial ATA (SATA)
84
User Guide
Submenu item
Boot Display Device
CPU Power Management
Adaptive S4
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Selection
• ThinkPad LCD
• Analog (VGA)
• Digital on ThinkPad
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Compatibility
Comments
pressed condition, and then
press the desired function
key. The action is equivalent
to pressing the Fn key and
the desired function key
simultaneously. If you press
the Fn key twice, the Fn
key is kept in a pressed
condition until you press the
Fn key again.
Select the display device
that is to be activated at
boot time. This selection
is effective for boot time,
password prompt, and
ThinkPad Setup.
Unless this power-saving
feature is disabled, it
stops the processor clock
automatically when there
is no system activity. You
usually do not need to
change this function.
Enable or disable a feature
that powers on the system
when AC is attached.
If you select Enabled, the
system is powered on when
the ac power adapter is
attached. When the system
is in hibernate state, the
system resumes.
If you select Disabled, the
system is not powered on
nor resumed when the ac
power adapter is attached.
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Enables or disables
keyboard beep when
unmanageable key
combinations are pressed.
Selects SATA controller
operation mode. If you
select Compatibility mode,