Front Turn Signal; Sidemarker, And Parking; Lamps - Chevrolet 2013 Express Owner's Manual

10-36 Vehicle Care
8. Reverse the steps to reinstall the
headlamp assembly.
To prevent headlamp vibration
and shortened bulb life, be sure
to insert the headlamp assembly
tabs in the slots at the lower
portion of the housing.
Sealed-Beam Headlamp
1. Headlamp retainer screws
2. Headlamp retainer
3. Sealed-beam headlamp bulb
To replace one of these bulbs:
1. Remove the four screws (1) from
the headlamp retainer (2).
Pull the retainer (2) out and set it
aside.
2. Pull the bulb (3) forward to gain
access to the electrical
connector.
3. Disconnect the electrical
connector (2) and remove the
headlamp bulb (1).
4. Reverse Steps 1 3 to reinstall
the headlamp.

Front Turn Signal,

Sidemarker, and Parking

Lamps

1. Front Parking and Turn
Signal Lamp
2. Front Sidemarker Lamp