Set Detect Digit Number; Set Auto Prefix Number; Default Settings - Motorola StarTAC SC200 Owner's Manual

10.4.1 Set detect digit number

You can set a detect number that can be up to 5 digits,
once this number has been set the phone will check the
first few digits of the any pre-dialled number and if they
match the detect number will be replaced them with the
prefix number.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to AUTO
PREFIX and press
4. The display shows DETECT
5. Enter the number and press
6. Press to return to standby.
10.4.2 Set auto prefix number
You can define a prefix number (maximum of 10 digits) to
be added to the beginning of any pre-dialled number.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to AUTO
PREFIX and press
4. Scroll or to PREFIX and press
5. Enter the number and press
6. Press to return to standby.
Advanced settings
and press .
.
.
DIGIT and press
.
and press .
.
.
.
NOTE
If no detect number is set the prefix number will be added
to all pre-dialled numbers.
10.5

Default settings

Key beep
Auto hang-up
Cordless handset ringer melody
Cordless handset ringer volume
Cordless handset ear volume
Phonebook
Calls list
Redial list
Base ringer volume
Base speaker volume
Base time format
Base date format
PIN code
Dial mode
Recall time
Keypad lock
On
On
Melody 1
3
2
Unchanged
No Number
No Number
3
2
24 Hours
DD/MM
0000
Tone
Short
Off
33