Table of Contents
Advertisement
5. Safety instructions
To ensure safe and failure-free operation of the MPPS-01 power supply, comply with the following precau-
tions:
Before connecting the power supply to the mains, make sure it is compatible with the mains voltage and fre -
quency.
The power supply is intended for the indoor use.
Do not use the power supply if the temperature and the air humidity extends the values valid for the PPS-02.
Use the proper cables to connect elements of the kit, dedicated for specified device only. Never cut or shorten
any cable, it may cause damage to your device.
Use the cables delivered by VIGO. In case of OEM systems, make sure the the cables match the specifica -
tion of the controller.
Turn off the power supply before plugging / unplugging cables. Avoid static discharges.
Important note!
If you are setting up own system supplied by the the custom power supply adaptor, please make sure,
the voltage/current matches to the values of the supply requirements of the MPPS-01.
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. +48 22 733 54 20; fax +48 22 733 54 26; e-mail:
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS- 11-08-16MB
info@vigo.com.pl
10
Advertisement
Table of Contents
