Table of Contents
Advertisement
Entering an Address
To set a destination by entering a street address:
1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map
DVD" under Maps on page 2-4 for more information.
A notice may appear. Touch the I agree screen
button to proceed.
3. Press the ROUTE hard key. Verify that the selected
Region is correct.
C
4. Press the
Address screen button.
5. Enter the street name using the alpha keypad on
the screen.
Do not enter directional information or street type,
and use the space symbol screen button (
between street or city names. For example, the street
name N. Royal Oak Rd. should be entered as royal
U
oak. Use the backspace (
an incorrect character has been entered.
6. Select the desired street name with the correct
designation (Dr., Ln., St., etc.) from the list.
U
)
V
) screen button if
7. If there is more than one city, the system displays
the list of cities that have a street with that name.
Select a city from the list.
8. Enter the house number using the numeric keypad
on the screen and touch the OK screen button.
A map screen appears with the destination marked.
h
9. Select the
(destination) symbol screen button.
10. Select the Guide screen button.
11. Once driving begins, an audio prompt to "Proceed
to the highlighted route" is heard. The vehicle is
now in route guidance mode.
See "Address" under Destination on page 2-40 for more
information.
Entering a Point of Interest (POI)
To set a destination by entering a Point of Interest (POI):
1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map
DVD" under Maps on page 2-4 for more information.
A notice may appear. Touch the I agree screen
button to proceed.
3. Press the ROUTE hard key. Verify that the selected
Region is correct.
1-9
Advertisement
Table of Contents
