Canon PowerShot ELPH 520 HS User Manual page 97

Special Modes for Other Purposes
If the flash fires, your shot may be overexposed. In this case, set the flash to !
•
and shoot again.
High-Speed Continuous Shooting
(High-speed Burst)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
"Specifications" in the Getting Started guide.
• The resolution is
• Focus, image brightness, and color are determined by the first shot.
• Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions, camera settings, and the zoom position.
• As more shots are taken, shooting may slow down.
• When using Face D (p. 59), the location in the image where the name is
recorded will be determined in the first shot, and will be recorded in the same
place for further shots.
Images Displayed During Playback
Each set of images shot continuously is managed as a single group, and only
the first image in that group will be displayed. To indicate that the image is part
of a group,
• If you erase a grouped image (p. 143), all images in the group are
also erased. Be careful when erasing images.
98
Choose
Follow steps 1 – 2 on p. 80 and choose
Shoot.
Hold the shutter button all the way down to
shoot continuously.
(1824 x 1368) and cannot be changed.
is displayed in he upper left of the screen.
.
Still Images
.