Akai MPC Essentials User Manual page 40

• As Audio Mixdown exports the Sequence as an audio
file. In the window that appears, you can set the audio
file's format:
o Audio Length lets you define the length of your
audio file with the Start bar and End bar, allowing
you to export a certain number of measures only.
You can also set the length of a "bounce tail" (Tail)
in seconds, which is useful when working with audio
effects like reverb or delay, whose sound may
exceed the defined export range.
o Render option lets you select which Stereo output
you render. You can select by clicking the drop-down menu under the checkbox.
o File format lets you select wav or aiff as the exported file format. You can select a Bit depth of
8-bit, 16-bit, 24-bit, or 32-bit, floating point.
o Sample rate lets you select from 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz. In most cases, we
recommend selecting 44.1 kHz.
o Click Export to open a window where you can enter a file name and set the save location.
o Click Cancel to close the window without exporting.
Exit closes the software. If you haven't saved any changes made to a currently open project, it will prompt
you to do so before quitting.
Mac OS X users: The Exit command is named Quit MPC and located in the MPC menu.
40