Shut Down Operations - ATN TTWS Series Operator's Manual

3.2.12. SHUT DOWN OPERATIONS

To finish the work, perform the following:
1. Use the POWER button to turn the scope off.
2. Hold down the POWER button (3 seconds) until the
away then release the POWER button. This is a safety so the
system is not accidentally turned off.
3. Return the scope to the case.
STEP 1
PRESS
AND HOLD
POWER
BUTTON
AND SEE "?"
FIGURE 3.14. POWER DOWN
? icon goes
STEP 2
RELEASE
POWER
BUTTON
WHEN "OK"
APPEARS
ON SCREEN
3-13