Download Print this page

Amptweaker SwirlPool User Manual page 3

Advertisement

Battery
Switch– This
switch turns
the batteries
off when not in
use. No need
to unplug the
input- disabled
when using an
adapter
Specs:
• Input impedance: 240K Ohm (effect on)
• Output Impedance: 1K Ohm (effect on)
• Current: 43mA with 2-9V batteries, 62mA with 18V adapter(adapter adds
knob LEDs) battery life is limited...keep battery clips taped when not in use
• Adapter: 18VDC adapter w/5.5mm X 2.1mm positive barrel center ground(-)
• Housing: 14 Gauge galvanized steel
• Weight: 3 pounds, Dimensions: 5.625"W X 5"D X 2.125"H
Amptweaker, LLC, P.O. Box 387, Batavia, OH 45103
Speed 2 Loop– this Pre-
series loop is only active
when speed 2 is selected
handmade in USA
©2012 Amptweaker, LLC
Battery Door– The battery door is held
closed by magnets, and can be opened
just by pulling out...no tools needed!
www.amptweaker.com
LEDs–light up
the knobs if an
adapter is used
Universal Effects Loop-
effects in this series loop
work when the SwirlPool
is On. A switch on the
bottom positions this
loop before or after the
Tremolo/Vibe circuit.

Advertisement

loading