Amptweaker tightboost User Manual

Download this manual

Welcome! Thanks for purchasing your TightBoost™

Welcome! Thanks for purchasing your

pedal, another Amptweaker™

pedal, the ﬁrst Amptweaker™ handmade product

designed with

desigded with consumersʼ advice.

of the TightDrive™, I received many requests for other

gain pedals. The TightBoost is a lower gain variation,

and includes a special Mid control that gradually adds

a parked-wah tone to the mix. Enjoy jamming through

it and ﬁnding ways it can help enhance your tone.

Keep those ideas coming!

Cool Ideas:

• True Bypass switching–buffered when pedal is ON

• Tight Attack control lets YOU dial in the chunk

• Boost, High, Mid-boost blends in Parked-Wah

• 2 position Wah Frequency switch

• Pre/Post selectable Effects Loop-tracks Bypass Switch!

• Battery On/Off switch with red ʻDonʼt Forgetʼ indicator

• LED lit knobs when using a DC adapter

• 14 Ga. steel chassis with magnetic sliding battery door

good tone comes from tweaking ...

After the success

James Brown,

Amp Engineer

Page 1 After the success of the TightDrive™, I received many requests for other gain pedals. The TightBoost is a lower gain variation, and includes a special Mid control that gradually adds a parked-wah tone to the mix. Enjoy jamming through it and ﬁnding ways it can help enhance your tone.
Page 2 How does the work? Mid-Wah–boosts the mid, and Boost–a High–EQ, after about halfway it begins Master Boost, set lower to blending in a set it either for get a more Wah type clean boost or typical wah of Mid use to balance boosted boost to bypassed...
Page 3 TightBoostʼs On/Off Switch Specs: • Input impedance: 250K Ohm (effect on) • Output Impedance: 1K Ohm (effect on) • Current: 11mA with 9V battery, 20mA with 9V adapter (adds knob LEDs) •...
Page 4 • Select Post/Effects Send to send to some other amp AFTER the TightBoost for a big stereo solo tone. • When using extremely high settings on the Tight control, you might need to increase your ampʼs bass control.