Installation; Mains Connection - Sennheiser SI 30 Instructions For Use Manual

Hide thumbs Also See for SI 30:

AF input (N)

INSTALLATION

•

Position the modulator as high as possible (eye-level). Make sure

that the diodes point at the receivers.

•

Do not cover the diodes! Do not obstruct the path of the light

between the modulator and the receiver.

Connect the NT 20 plug-in mains unit to the mains. Plug the cable into

power supply socket (S) on the SI 30. Pay attention to the correct

direction of the plug.

AF CONNECTION

Use the AF connection cable to connect the AF input (N) on the SI 30 to

the headphone socket of the sound source.

Please contact your nearest dealer if your sound source has no

3.5 mm or 6.3 mm socket.

RF OUTPUT FOR CONNECTION OF INFRA-RED RADIATORS

Connect SZI 1029, SZI 1015 or SZI 30 infra-red radiators to provide

sufficient IR capacity for larger rooms. The SZI 1029, SZI 1015 and

SZI 30 connect to the 3.5 mm mono jack socket (Z) on the SI 30

modulator (please see list of available accessories).

Mode selection switch (B)

Channel 1, 2, Stereo

Power supply socket

(S)

RF output (Z) for

connection of

infra-red radiators

Table of Contents