Advertisement
Installing the Power Supply and Cord
1. Insert the power supply's 4-prong plug into the POWER jack.
When inserting the plug at the rear of the access unit, align the plug with the notch
above the POWER jack. Make sure the locking tab snaps securely into the jack.
COM
POWER
COM
POWER
Locking
Tab
2. Insert the 3-prong socket end of the power cord into the power supply's receptacle.
3. Insert the plug end of the power cord into the grounded power outlet.
Verification Check
-
Did any LEDs light?
If yes, the access unit has power and is operational.
If no, refer to Troubleshooting on the next page.
PORT 1
PORT 2
NET
BKP
DSX-1
Power Supply/Cord
3
Grounded
Power Outlet
97-15452
Advertisement
